User manual SAMSON S62

[. . . ] MIXER S62AMPLIFIER CHANNEL 1 0 CHANNEL 2 0 CHANNEL 3 0 CHANNEL 4 0 CHANNEL 5 0 CHANNEL 6 0 RETURNS 0 SAMSON S62 MIXER AMPLIFIER 30Hz +15db 120Hz 480Hz 2Khz 8Khz +15db 0dB 0dB · +10 -15 HIGH +15 · +10 -15 HIGH +15 · +10 -15 HIGH +15 · +10 -15 HIGH +15 · +10 -15 HIGH +15 · +10 -15 HIGH +15 AUX REVERB AUX REVERB AUX REVERB AUX REVERB AUX REVERB AUX REVERB · +10 AUX EFFECT 0 0 0 0 0 0 0 · LEVEL +10 -15 LOW +15 · LEVEL +10 -15 LOW +15 · LEVEL +10 -15 LOW +15 · LEVEL +10 -15 LOW +15 · LEVEL +10 -15 LOW +15 · LEVEL +10 -15 LOW +15 · +10 REVERB -15db 30Hz 0 TAPE IN CH 6 +10 PROTECT PEAK POWER 120Hz 480Hz 2Khz 8Khz -15db · LINE MIC MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MAIN LEVEL FUSE 5A/250V FUSE S62 MIXER AMPLIFIER 150 WATTS 4 POWER ON AMP IN SAMSON PRE-OUT AUX EFFECT RETURN AUX SEND CD/TAPE IN L OFF R (1oK+4dBu) (<75+4dBu) (10K+4dBu) (<75+4dBu) (10K-10dBu) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! S/N AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE ~AC INPUT 120V, 60Hz 135W SPEAKER OUTPUT MIN 4 NOTICE: ALL MIC INPUT XLR PHANTOM POWERED. The S62 Mixer Amplifier is a monophonic 6-input mic/line mixer with a dedicated power amp producing 150 W into 4 ohms. [. . . ] · Master reverb level control. Samson Technologies Corp. , P. O. Box 9031, Syosset, NY 11791-9031 · Phone: (516) 364-2244 · Fax: (516) 364-3888 · www. samsontech. com ARCHITECT'S & ENGINEER'S SPECIFICATION The mixer amplifier shall incorporate a 150 W monophonic amplifier, a 5-band graphic equalizer and a monophonic mixer with 6 microphone/line-input channels. Microphone inputs shall be on XLR-type connectors and line inputs shall be on balanced 1/4 Tip-RingSleeve phone connectors. An independent line-level CD/tape input (routed to channel 6) shall be on phono connectors. Each channel shall have an aux/reverb send, 2-band equalization and a level control. The mixer shall provide an effects output on a 1/4 phone connector, as well as a preamp out and power amp in for submix applications on 1/4 phone connectors. An effects return shall be provided on a 1/4 phone connector, and it shall have an independent level control. Phantom Power of +48 V shall be provided for operation of condenser microphones. [. . . ] 115 Vac · 50/60 Hz 134 W (115 Vac) AUX/REV MAIN +36 CHANNELS 1-5 AUX/REV AUX/REV AUX SEND LOW HIGH REVERB LEVEL MIC INPUT 3 2 1 2 3 1 MIC PRE (LINE) R T S PAD -10db (INV) REVERB 2 BAND EQ +/-15db LINE INPUT CHANNEL 6 AUX/REV LOW HIGH MAIN 5 BAND GRAPHIC EQ +/-15db PRE-OUT LEVEL MIC INPUT 3 2 1 2 3 1 -10db MIC PRE (LINE) PAD TAPE IN CH6 2 BAND EQ +/-15db (INV) T TN S AMP IN LINE INPUT R T S TAPE/CD L 2 INPUT PEAK DETECTOR PEAK TAPE/CD R AUX RETURN AUX. EFFECT T TN AUX EFFECT RETURN S MAIN 150 Wrms Power Amp A B AUX/REV MAIN Specifications subject to change without notice. [. . . ]