User manual SAMSUNG SYNCMASTER 150T-TFT

[. . . ] SyncMaster 150T Dual Interface(Analog/Digital) Flat Panel Monitor Owner's Instructions Information in this document is subject to change without notice. © 2000 Samsung Electronics Co. , Ltd. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co. , Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] You can unlock the OSM controls at any time by using the same procedure as described below. 1 Push and hold the MENU button for 5 seconds to Lock or Unlock the controls. When locked, a "LOCKED!" message displays along the bottom of each OSM menu screens except the "Brightness" and "Contrast" screens. On-Screen Menu System (OSM) Function icons Function name Setting slidebar Numeric value indicator Figure 7. On-Screen Menu (OSM) 13 English Adjusting Your FPD Accessing the menu system 1 2 3 4 With the OSM off, push the MENU button to open it and display the main function menu. Use the "­" and "+" buttons to move between the function icons. As you move from one icon to another, the function name changes to reflect the function or group of functions represented by that icon. See the Screen controls table to view a complete list of all the functions available for the monitor. Push the MENU button once to activate the highlighted function then use the "­" and "+" buttons to move to sub-menus, or according to the indicators on the menu, to make your changes. After selecting a function, use the "­" and "+" buttons to make the adjustments. The setting slidebar moves and the numeric value indicator changes to reflect your adjustments. NOTE: The numeric value indicator is provided as a point of reference only and does not reflect any measureable value. 5 Push the EXIT button once or twice to return to the main menu to select another function or push the EXIT button 1 to 3 times to exit from the OSM. OSM functions and adjustments D Functions marked will be during Digital Input. Screen controls Icon Menus and Sub-menus Function Descriptions ­ + Brightness AUTO EXIT MENU AUTO EXIT MENU Contrast AUTO EXIT MENU AUTO EXIT MENU A. O. 14 Adjusting Your FPD Table 2. Screen controls (Continued ) Icon Menus and Sub-menus Function Descriptions ­ + Image Lock: Image Lock controls adjust for and limit the amount of noise in the video signal which causes horizontal lines or areas on the screen where the image appears to be unstable and jitters or shimmers. The Fine and Coarse adjustments allow you to more closely adjust your monitor to your preference. Use the "­" and "+" buttons to adjust away interference. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. This function may change the width of the display image. Use the H-Position menu to center the display image on the screen. s s Fine Coarse A. O. V-Position AUTO EXIT MENU AUTO EXIT MENU AUTO EXIT MENU AUTO EXIT MENU A. O. 15 English Adjusting Your FPD Table 2. Screen controls (Continued ) Icon Menus and Sub-menus Function Descriptions ­ + Reset Restores the viewing area and color settings to their original manufacturing levels Resets the H-Position and V-Position of the viewing area Resets the Brightness, Contrast and Color Control functions Select the Color Mode you find most comfortable and then fine tune the colors using the Color Control menus Sets the color to the natural characteristics of the FPD Sets the color to a warm (reddish) white Sets the color to a cool (bluish) white Adjusts the saturation of Red, Green and Blue in the display area Decreases redness Decreases greenness Decreases blueness Increases redness Increases greenness Increases blueness s Geometry Reset Color Reset s A. O. Color Temperature s Mode 1 Mode 2 Mode 3 s A. O. s Color Control s R(ed) G(reen) B(lue) s A. O. s 16 Adjusting Your FPD Table 2. Screen controls (Continued ) Icon Menus and Sub-menus Function Descriptions ­ + Language: s s s s s s English Deutsch Español Français Italiano Svenka Language sets the OSM to display in one of five languages. The language chosen affects only the language of the OSM. It has no effect on any software running on the computer. Miscellaneous This menu provides access to special convenience functions. [. . . ] s Consult the dealer or an experienced radio/TV technician for help. The party responsible for product compliance: SAMSUNG ELECTRONICS CO. , LTD America QA Lab of Samsung 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor voltage rating. [. . . ]