User manual SAMSUNG SYNCMASTER T19B300EW

[. . . ] TB300 TB350 LED TV MONITOR user manual (MFM TV) Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital LED display notice 1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. [. . . ] MPEG Audio, HE-AAC, ATV Sound). Broadcast Audio Options Audio Language (digital channels only) Change the default value for audio languages. The available language may differ depending on the broadcast. Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. Audio Format (digital channels only) Select the audio format. Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. Audio Description (Off / On): Turn the audio description function on or off. Speaker Settings Speaker Select (External Speaker / TV Speaker):A sound echo may occur due to a difference indecoding speed between the main speaker and theaudio receiver. In this case, set the TV to External Speaker. When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. When Speaker Select is set to External Speaker. x x TV Speaker: Off, External Speaker: On TV Speaker: On, External Speaker: On When Speaker Select is set to TV Speaker. If there is no video signal, both speakers will be mute. It's not available for TB300 series. Volume: Adjust the audio description volume. Additional Settings (digital channels only) DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. Reset Sound (Yes / No) Reset all sound settings to the factory defaults. According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. To increase or decrease the volume, adjust between the range 0 and -10 respectively. Selecting the Sound Mode t When you set to Dual fg, the current sound mode is displayed on the screen. Audio Type Mono Stereo Dual Mono Stereo Dual Dual f-g Mono Stereo Mono Dual f Dual g Mono Mono Stereo Mono Dual f Dual g Default Automatic change Dual f Automatic change Dual f SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). It's not available for TB300 series. A2 Stereo NICAM Stereo If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono. Only activated in stereo sound signal. Only available when the input Source is set to TV. English 26 Basic Features System Menu Setting the On / Off Timer On Timer On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. On Timer 1 Setup Sun Mon Tue Wed Thu Fri Setting the Time MENUm System ENTERE Time Clock: Setting the clock is for using various timer features of the LED display. Off Sat x The current time will appear every time you press the INFO button. If you disconnect the power cord, you have to set the clock again. Time Volume Source Aerial Channel 0:00 20 TV DTV 1 Clock Mode (Auto / Manual) Auto: Set the current time automatically using the time from a digital channel. Close R x The antenna must be connected in order to set the time automatically. Return Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. Clock Set: Set the Day, Month, Year, Hour and Minute manually. [. . . ] and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2. 0 Channel is a trademarks of DTS, Inc. (Only available in TB300 series) Manufactured under licence under U. S. Patent #'s: 5, 451, 942; 5, 956, 674; 5, 974, 380; 5, 978, 762; 6, 487, 535 & other U. S. [. . . ]