User manual SAMSUNG 2033SN

[. . . ] SyncMaster 2033SN/2233SN LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. [. . . ] Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. MENU , , MENU Fine Adjusting the Monitor Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). MENU , , , MENU Sharpness Changes the clearance of image. ( Not available in MagicColor mode of Full and Intelligent. ) MENU , , , MENU H-Position Changes the horizontal position of the monitor's entire display. MENU , , , MENU Adjusting the Monitor V-Position Changes the vertical position of the monitor's entire display. MENU , , , MENU OSD Language You can choose one of nine languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU , , MENU Adjusting the Monitor Transparency Change the transparency of the background of the OSD. · Off , · On , , MENU MENU Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. · 5 sec , · 10 sec , · , 20 sec MENU · 200 sec MENU Adjusting the Monitor Setup Reset Reverts the product settings to factory defaults. · No , · Yes , MENU MENU Customized Key You can specify a function which will be activated when the Customized Key ( ed. MENU , , , MENU ) is press- Off Timer Adjusting the Monitor The monitors will turn off automatically at the specified time. · Off , · On , , , MENU MENU Image Size You can change the size of the screen displayed on your monitor. · · · Auto · Wide Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals. Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. Note · · Signals not available in the standard mode table are not supported. If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed. , , , MENU MENU Information Shows a video source, display mode on the OSD screen. [. . . ] The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. [. . . ]