User manual SAMSUNG 2033SW

[. . . ] SyncMaster 2033SW/2233SW LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] · · · · Cool - Makes whites bluish. Custom - Select this mode when you want to adjust the image according to your preferences. ( Not available in MagicColor mode of Full and Intelligent. ) MENU , , , MENU Color Control Adjusts individual Red, Green, Blue color balance. ( Not available in MagicColor mode of Full and Intelligent. ) MENU , , , , MENU 48 Adjusting the Monitor Color Effect You can change the overall mood by changing the screen colors. ( Not available in MagicColor mode of Full and Intelligent. ) · · · · · · Off · Grayscale · Green · Aqua · Sepia Off - This applies an achromatic color to the screen to adjust the screen effects. Grayscale - The default colors of black and white are displayed. Green - This applies the green color effect to a black and white screen. Aqua - This applies the aqua color effect to a black and white screen. Sepia - This applies the Sepia color effect to a black and white screen. , , , MENU MENU Gamma Gamma correction changes the luminance of the colors with intermediate luminance. · Mode 1 , · Mode 2 , · , Mode 3 MENU MENU 49 Adjusting the Monitor Image Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. (Available in Analog mode only) MENU , , MENU Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). (Available in Analog mode only) MENU , , , MENU 50 Adjusting the Monitor Sharpness Changes the clearance of image. ( Not available in MagicColor mode of Full and Intelligent. ) MENU , , , MENU H-Position Changes the horizontal position of the monitor's entire display. (Available in Analog mode only) MENU , , , MENU V-Position Changes the vertical position of the monitor's entire display. (Available in Analog mode only) 51 Adjusting the Monitor MENU , , , MENU OSD Language You can choose one of nine languages. Note The language chosen affects only the language of the OSD. [. . . ] Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. [. . . ]