User manual SAMSUNG SYNCMASTER 220TN

[. . . ] SyncMaster 220TN Install driver Install programs Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. [. . . ] 2 (group), the users registered to the corresponding group will appear. Call History Screen 1. Displays the outgoing, incoming, and missed calls. They are sorted in the order of the time that the call was made. (Incoming calls) SYNCON Menus Main Log Out - Logs out from the SYNCON system. The Log Out function may be restricted depending on whether the current mode is Server or Non-Server mode. Close - Minimizes SYNCON to an icon in the system tray. To exit SYNCON , use the menu displayed when right-clicking the icon in the system tray. Actions You can use basic functions, such as making a call, instant messaging, and muting the sound, etc. Mute - Using this function, you can mute the audio data of a video call. (You can suspend a video call depending on your requirements. ) Disconnect - Disconnects an existing call. Call - Makes a call to the opposite party. Send Instant Message - Sends a message to the opposite party. Office Sharing - Allows you to share office files with persons you are chatting to. Tools You can add, edit or delete a person or group and check the IP address of a registered person. Add Person - Adds a person to whom you wish to make a video call. Info - If Phonebook is selected, the information for the user selected in the phonebook is displayed. If Call history is selected, the information for the user selected in the call history is displayed. Edit - Edits the information for the user selected in the phonebook. (This is only enabled if the Phonebook is selected. ) Save - Saves the information stored in the call history to the phonebook. (This is only enabled if the Call history is selected. ) View - All - Missed - Outgoing - Incoimng :Displays all calls. :Displays incoming calls. Delete - If the Phonebook is selected, the selected phonebook entry is deleted. If the Call history is selected, the selected call history entry is deleted. Delete All - Deletes all Call history entries. Settings You can configure the basic SYNCON environment using the Tools > Settings menu item. General 1. When checked, SynCon starts automatically when Windows starts. [. . . ] Unit : kHz Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the NonInterlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. Resolution The number of horizontal and vertical dots used to compose the screen image is called 'resolution'. [. . . ]