User manual SAMSUNG SYNCMASTER 2220LM

[. . . ] SyncMaster 2220LM SyncMaster 2220LM Install drivers Model SyncMaster 2220LM Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged or loose plug. l This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. l This may cause electric shock or fire. Use only a properly grounded plug and receptacle. l An improper ground may cause electric shock or equipment damage. (Class l Equipment only. ) Insert the power plug firmly so that it does not come loose. l A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. l This may cause electric shock or fire. Do not connect too many extension cords or plugs to one outlet. l This may cause fire. Do not disconnect the power cord while using the monitor. l A surge may be caused by the separation and may damage the monitor. Do not use the power cord when the connector or plug is dusty. l l If the connector or plug of the power cord is dusty, clean it with a dry cloth. [. . . ] Execute X-Window after setting other requested hardware. [AUTO] ] Opens the on-screen menu and exits from the menu or closes the adjustment menu. These buttons allow you to adjust items in the menu. Press this button to activate a highlighted menu item. Press to self-adjust the incoming PC signal automatically. The values of fine, coarse and position are adjusted automatically. AUTO Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) AUTO To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD Menu Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings. Lock : Hold down the menu button for more than five seconds to activate the OSD adjustment lock function. OSD Lock & Unlock Unlock : Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function. Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust MagicBright ( ) using the Direct button. MagicBrightTM Menu MagicBrightTM Description Push the MagicBright button to circle through available preconfigured modes. - Six different modes (Custom/Text/Internet/Game/Sport/Movie) Volume Menu Volume Description When OSD is not on the screen, push the button to adjust volume. Picture Color Image OSD Setup Information Brightness Color Tone Coarse Language Image Reset Contrast Color Control Fine H-Position Color Reset Gamma Sharpness V-Position H-Position Transparency V-Position Display Time Picture Menu Description You can use the on-screen menus to change the brightness according to personal preference. [MENU , MENU] Play/Stop Brightness Contrast You can use the on-screen menus to change the contrast according to personal preference. [MENU , , MENU] Color Menu Description The tone of the color can be changed and one of four modes can be selected - Cool, Normal, Warm and Custom. Custom - Select this mode when you want to adjust the image according to your preferences. [MENU , , MENU] Play/Stop Color Tone Adjusts individual R, G, B color balance. Color Control [MENU , , , , MENU] Gamma correction changes the luminance of the colors with intermediate luminance. Gamma l l l Mode 1 Mode 2 Mode 3 , , MENU] [MENU , Image Menu Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. (Available in analog mode only) [MENU , , MENU] Play/Stop Coarse Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). (Available in analog mode only) [MENU , , , MENU] Changes the clearance of image. [. . . ] Example :If the resolution is 1680 x 1050 , this means the screen is composed of 1680 horizontal dots (horizontal resolution) and 1050 vertical lines (vertical resolution). For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. ¡ ¡ Resolution: 1680 x 1050 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. [. . . ]