User manual SAMSUNG SYNCMASTER 2233BW

[. . . ] LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] Unit: Hz Specifications General General Model Name LCD Panel Size Display area Pixel Pitch Synchronization Horizontal Vertical Display Color 16. 7M Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0. 7 Vp-p ± 5 % Separate H/V sync, Composite, SOG TTL level (V high 2. 0 V, V low 0. 8 V) Maximum Pixel Clock 137 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin - to - 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight (Simple Stand) 451. 0 x 331. 7 x 72. 4 mm / 17. 8 x 13. 1 x 2. 9 inch (Without Stand) 451. 0 x 379. 3 x 200. 0 mm / 17. 8 x 14. 9 x 7. 9 inch (With Stand), 4 kg / 8. 82 lbs VESA Mounting Interface 75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware. ) Environmental considerations Temperature : 50°F ~ 104°F (10°C ~ 40°C) Operating Humidity : 10 % ~ 80 %, non-condensing 1440 x 900@60 Hz 1440 x 900@75 Hz 30 ~ 81 kHz 56 ~ 75 Hz 19 inch (48 cm) 408. 24 mm (H) x 255. 15 mm (V) 0. 2835 mm (H) x 0. 2835 mm (V) SyncMaster 933BWPLUS Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Storage Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. Note Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment. ) Specifications PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. State Power Indicator Power Consumption Normal Operation On 34 watts Power saving mode Blinking Less than 1 watts Power off (Power button) EPA/ENERGY 2000 Off Less than 1 watts This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with a computer equipped with VESA DPM functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 800 VESA, 1280 X 960 VESA, 1280 X 1024 VESA, 1280 X 1024 VESA, 1440 X 900 VESA, 1440 X 900 Horizontal Frequency (kHz) 31. 469 35. 000 49. 726 68. 681 31. 469 37. 861 37. 500 35. 156 37. 879 48. 077 46. 875 48. 363 56. 476 60. 023 67. 500 49. 702 60. 000 63. 981 79. 976 55. 935 70. 635 Vertical Frequency (Hz) 70. 087 66. 667 74. 551 75. 062 59. 940 72. 809 75. 000 56. 250 60. 317 72. 188 75. 000 60. 004 70. 069 75. 029 75. 000 59. 810 60. 000 60. 020 75. 025 59. 887 74. 984 Pixel Clock (MHz) 28. 322 30. 240 57. 284 100. 000 25. 175 31. 500 31. 500 36. 000 40. 000 50. 000 49. 500 65. 000 75. 000 78. 750 108. 000 83. 500 108. 000 108. 000 135. 000 106. 500 136. 750 Sync Polarity (H/V) -/+ -/-/-/-/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ +/+ +/+ -/+ -/+ Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz Specifications General General Model Name LCD Panel Size Display area Pixel Pitch Synchronization Horizontal Vertical Display Color 16. 7M Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0. 7 Vp-p ± 5 % Separate H/V sync, Composite, SOG TTL level (V high 2. 0 V, V low 0. 8 V) Maximum Pixel Clock 137 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin - to - 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight (Simple Stand) 451. 0 x 331. 7 x 72. 4 mm / 17. 8 x 13. 1 x 2. 9 inch (Without Stand) 451. 0 x 379. 3 x 200. 0 mm / 17. 8 x 14. 9 x 7. 9 inch (With Stand), 4 kg / 8. 82 lbs VESA Mounting Interface 75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware. ) Environmental considerations Temperature : 50°F ~ 104°F (10°C ~ 40°C) Operating Humidity : 10 % ~ 80 %, non-condensing 1440 x 900@60 Hz 1440 x 900@75 Hz 30 ~ 81 kHz 56 ~ 75 Hz 19 inch (48 cm) 408. 24 mm (H) x 255. 15 mm (V) 0. 2835 mm (H) x 0. 2835 mm (V) SyncMaster 933GW Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Storage Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. [. . . ] The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. [. . . ]