User manual SAMSUNG SYNCMASTER S23A700D

[. . . ] User manual SyncMaster S23A700D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00106C-02 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. [. . . ] This menu is not available when This menu is not available when Bright is in Cinema or Dynamic Contrast mode. Color is in Full or Intelligent mode. 4. 4. 1 Configuring Sharpness 1 2 3 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. Press [ Press [ appear. PICTURE 3D MAGIC Brightness Contrast Sharpness Response Time HDMI Black Level Return Normal ] to move to Picture and press [ ] to move to Sharpness and press [ ] on the product. The following screen will 50 75 60 Normal Adjust Enter 4 Adjust the Sharpness using the [ ] button. 4. 5 Response Time Accelerate the panel response rate to make video appear more vivid and natural. This option is not available if 3D Mode is enabled. It is best to set Response Time to Normal or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. 4 Screen Setup 48 4 1 2 3 Screen Setup 4. 5. 1 Configuring Response Time Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. Press [ Press [ appear. PICTURE 3D MAGIC Brightness Contrast Sharpness Response Time HDMI Black Level Return Normal Faster Fastest Move Enter 75 60 2200 ] to move to Picture and press [ ] on the product. The following screen will ] to move to Response Time and press [ 4 5 Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. 4. 6 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc. ) may occur, depending on the connected source device. In such case, HDMI Black Level HDMI Black Level can be used to adjust the image quality. 1 2 3 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. Press [ Press [ will appear. PICTURE 3D MAGIC Brightness Contrast Sharpness Response Time HDMI Black Level Return ] to move to Picture and press [ ] on the product. The following screen ] to move to HDMI Black Level and press [ 75 60 2200 : : Normal Low Enter Move Normal: Select this mode when there is no contrast ratio degradation. Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation. 4 Screen Setup 49 4 4 5 Screen Setup Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. HDMI Black Level may not be compatible with some source devices. 4 Screen Setup 50 5 5. 1 Configuring Tint Adjust the tint of the screen. This option is not available when or Dynamic Contrast mode. Bright is set to Cinema Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in Full or Intelligent mode. 5. 1. 1 Configuring Red 1 2 3 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. Press [ Press [ ] to move to COLOR and press [ ] to move to Red and press [ COLOR Red Green Blue Color Tone Gamma Normal Mode1 50 50 50 ] on the product. The following screen will appear. Return Adjust Enter 4 Adjust the Red using the [ ] button. 5. 2 Green Adjust the value of the color green in the picture. [. . . ] charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems. ) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. [. . . ]