User manual SAMSUNG SYNCMASTER 241MP

[. . . ] BN68-00169C-00_NTSC ENG 2/5/02 3:42 PM Page 37 SyncMaster 211MP SyncMaster 241MP (For NTSC systems) TFT-LCD Monitor Owner's Instructions BN68-00169C-00_NTSC ENG 2/5/02 3:41 PM Page 2 Thank You for Choosing Samsung Thank you for choosing Samsung!Your new Samsung LCD TV/Monitor represents the latest in LCD TV/Monitor technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Warning! [. . . ] The values of fine, coarse and position are adjusted automatically. (It works PC mode only. ) (Power) Turns ON/OFF the LCD TV/Monitor. 13 BN68-00169C-00_NTSC ENG 2/5/02 3:41 PM Page 14 Viewing Your LCD TV/Monitor Remote Control Power Self adjust to the incoming video signal AUTO DISPLAY STILL Power SOURCE Display the setting information Picture freeze Available sources selection (TV/Video/S-Video/DVD/DTV/PC) Picture effect selection Next channel P. STD S. STD Sound effect selection Menu display and change confirmation VOL CH VOL MENU CH Volume decrease Volume increase Previous channel MUTE EXIT Temporary sound switch-off 1 2 3 Exit from the OSD 4 5 6 Numeric buttons for direct channel access Three-digit channel selection Automatic switch-off Picture size selection Multichannel Television Stereo Picture-By-Picture (Double screen) Parental lock Caption decoder control 7 8 9 PRE-CH +100 SLEEP 0 V. DOLBY Previous channel Virtual Dolby menu display P. SIZE MTS ADD/ERASE CH. SCAN Channel scan Channel add or erase Picture-In-Picture On/Off PIP size selection PIP location PBP LOCATE SIZE PIP ON V. CHIP CAPTION x The channel up/down and volume up/down buttons are used to select the menu option and change these values. x It is possible that the work of the transmitter is dull or not operated normally if the light of the Bulb is on around the set. 14 BN68-00169C-00_NTSC ENG 2/5/02 3:41 PM Page 15 Adjusting Your LCD TV/Monitor Automatic Save Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the LCD TV/Monitor automatically saves any adjustment you have made. These changes are saved into a user area in the LCD TV/Monitor. The LCD TV/Monitor can save adjustments for up to 4 user modes. It has 13 for 211MP (15 for 241MP) factory preset or preload modes, one for each signal frequency as listed in table on page 29. If you have made no adjustments, the OSD disappears and the LCD TV/Monitor does not save anything. Accessing the Menu System 1 2 3 4 5 Press the MENU button to display the main OSD menu. Use the /// buttons to move from one function to another. As you move from one icon to another, the function name changes to reflect the function or group of functions represented by that icon. Press the MENU button once to activate the highlighted function, then follow the Tool Tips to select the function and adjust the value. Use the / buttons to select the sub-menu, and press the MENU button once to activate the selected submenu. After selecting a function, use the / buttons to make necessary adjustments. The setting bar moves and the numeric value indicator changes to reflect your adjustments. 6 The numeric value indicator is provided as a point of reference only and has nothing to do with a real measurement. Press the EXIT button a couple of times to return to the main menu to select another function or to exit from the OSD. Changing your Language Main Menu Sub-Menus Function Sleep Timer PIP PBP Caption V-Chip Language Function Descriptions Off When you start using your LCD TV/Monitor for the first time, you must select the language which will be used for displaying menus and indications. Select a particular language by pressing the - or + button. The following languages are available: English, Spanish, Franais, Portugus. English Move Select Exit 15 BN68-00169C-00_NTSC ENG 2/5/02 3:41 PM Page 16 Adjusting Your LCD TV/Monitor Setting the Channel Main Menu Sub-Menus Channel Ant/CATV Auto Program Fine Tune Add/Erase : LNA : Function Descriptions Ant 00 Erased Off Selecting the Video Signal Source Before begin memorizing the available channels, you must specify the type of signal source that is connected to the your LCD TV/Monitor. Press the - or + button to select Ant (antenna) or CATV (cable system). Move Select Exit Channel auto program does not work when the V-Chip function is active. Channel Ant/CATV Auto Program Fine Tune Add/Erase : LNA : Ant 00 Erased Off Memorizing the Channels Automatically Your LCD TV/Monitor can memorize and store all of the available channels found automatically for both "offair" (antenna) and cable channels. Press the - or + button, and then begin memorizing all of the available channels with the horizontal bar is displayed. Move Select Exit Channel Ant/CATV Auto Program Fine Tune Add/Erase : LNA : Ant 00 Erased Off Fine tuning Channel Reception If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the memorize and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel. Move Adjust Exit Channel Ant/CATV Auto Program Fine Tune Add/Erase : LNA : Ant 00 Erased Off Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan operation. when you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Move Select Exit You can do easily by pressing the ADD/ERASE button on the remote control. continued. . . 16 BN68-00169C-00_NTSC ENG 2/5/02 3:41 PM Page 17 Adjusting Your LCD TV/Monitor Setting the Channel Main Menu Sub-Menus Channel Ant/CATV Auto Program Fine Tune Add/Erase : LNA : Function Descriptions Ant 00 Erased On Using the LNA (Low Noise Amplifier) function This function is very useful in the situation that your LCD TV/Monitor is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. [. . . ] 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel. : (905) 542-1199 http://www. samsung. ca AUSTRALIA Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www. samsung. com. au/ AUSTRALIA COLOMBIA Samsung Electrinics Colombia Cra 9 No 99A-02 Of. 106 Bogota, Colombia Tel. : 9-800-112-112 Fax: (571) 618 - 2068 http://www. samsung-latin. com/ e-mail : soporte@samsung-latin. com Samsung Electronics Australia Pty Ltd. [. . . ]