User manual SAMSUNG SYNCMASTER 2494HS QUICK GUIDE

[. . . ] LCD MONITOR quick start guide 2494HS 2494HM Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Monitor and HAS stand Type 2 Monitor and HAS-USB stand Type 3 Monitor and Simple stand Type 4 Introduction Monitor and Simple-USB stand Note MagicRotation program can not be provided as Simple Stand does not support Pivot function. List of Parts Quick Setup Guide Warranty Card (Not available in all locations) User's Guide D-Sub Cable Power Cord Option USB Cable Cable holding ring Sold separately DVI Cable Stereo Cable HDMI Cable Headphones Introduction Note · · USB cable is only provided when the stand type is HAS-USB or SIMPLE-USB. Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE-USB. Your Monitor Initial Settings Select the language using the up or down key. [. . . ] The DOWN port of the monitor without connecting them to USB port of the monitor supports High-Speed Certified USB 2. 0. High speed Full speed 12 Mbps 2. 5 W (Max. , each port) Low speed 1. 5 Mbps 2. 5 W (Max. , each port) Data Rate 480 Mbps Power Consump- 2. 5 W tion (Max. , each port) 1. Connect the cable. Note To use UP port of the monitor and the USB port of the computer with the USB DOWN port, you have to connect the UP (Upstream Cable) to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port. Connections 2. 3. Connect the DOWN port of the USB monitor and a USB device with the USB cable. The use procedures are as the same as those for using an external device connecting to the PC. · · You can connect and use a keyboard and mouse. You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc. ) · You can run, move, copy or delete the files on the storage device. (Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3 player, etc. ) · You can use other USB devices that can be connected to a computer. Note When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product. ) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. Some products do not follow the USB standard, and it may cause a malfunction of the device. If the device malfunctions even if it is connected to the computer, contact the service center of the device/computer. Connecting Headphone Note You may connect your headphones to the monitor. 1. Connect your headphones to the Headphone connection terminal. Connections Using the Stand Monitor Assembly (Simple stand/Simple-USB stand) HAS Stand / HAS USB Stand Stand Stopper Note When rotating the monitor screen, you should lift it to the maximum height of the stand and then lean the top backwards. Otherwise, the corners of the monitor screen may come into contact with the floor and become damaged. Swivel stand Connections Using ( ), You can swivel the monitor left and right at an angle of 350° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor, the power cord of cable can be destroyed. Tilt angle HAS Stand / HAS USB Stand : Using ( ), You can adjust the tilt angle within a range of -5° forward to 25° backward for the most comfortable viewing angle. Simple stand/Simple-USB stand : Using ( ), You can adjust the tilt angle within a range of 0° forward to 23° backward for the most comfortable viewing angle. Attaching a Base This monitor accepts a 200 mm x 100 mm VESA-compliant mounting interface pad. Connections Simple Stand Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. HAS Stand Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove four screws and then remove the stand from the LCD monitor. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. · · · Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury. [. . . ] If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. You need to reboot the computer for it to operate normally after installing or removing the program. Note Visit the MagicTuneTM website and download the installation software for MagicTuneTM MAC. Check the following items if there is trouble with the monitor. Check if the power cord and the video cables are properly connected to the computer. Check if the computer beeps more than 3 times when booting. [. . . ]