User manual SAMSUNG SYNCMASTER 320P

[. . . ] SyncMaster 320P Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. [. . . ] 4) Position - Adjusts the Position of the selected display. 5) Auto Adjustment - Self-Adjusts the incoming PC signal automatically. Settings Control is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 9. Click on Maintenance from the main icons and the Maintenance Control screen appears. An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows Maintenance Control for all input sources. 2) Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control function. The Maintenance Control feature is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 10. Click on Maintenance from the main icons and the Maintenance Control screen appears. 1) Screen Scroll Eliminates the afterimages that can be caused when the selected display stays in Pause mode for an extended period of time. The repeat cycle timer can be selected by hours and seconds. The Maintenance Control feature is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 11. Click on Maintenance from the main icons and the Maintenance Control screen appears. 1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. 2) Screen Divider - The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. The selection will be set up by pressing a number in the selected mode. . 2*2 3*3 1*5 5*1 3) On / Off - Turns the Video Wall function of the selected display On/Off. 4) Format - The format can be selected to see a divided screen. Full Natural The Maintenance Control function is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 12. [. . . ] When this occurs, the previous image may be seen when the pattern is changed. To prevent this, the accumulated voltage difference must be decreased. Power Off, Screen Saver, or Power Save Mode Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use Set the Monitor to power off with the PC Display Properties Power Scheme. Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color Information periodically Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes. Avoid using a combination of characters and background color with large difference in luminance. [. . . ]