User manual SAMSUNG SYNCMASTER 400CXN

[. . . ] SyncMaster 400CXN, 460CXN LCD Display User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] Normal Low Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. MENU Wall ] Note When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode. ENTER [Setup] ENTER [Video Video Wall MENU ENTER [Setup] Wall ] ENTER [Video Wall ] ENTER [Video , ENTER Turns Off/On the Video Wall function of the selected display Off/On. Off On Adjusting the LCD Display Format MENU ENTER [Setup] Wall ] ENTER [Format] ENTER [Video , ENTER The Format can be selected to see a divided screen. Full Provides a full screen without any margins. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU ENTER [Setup] Wall ] ENTER [Horizontal] ENTER [Video , ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU ENTER [Setup] Wall ] ENTER [Vertical] ENTER [Video Adjusting the LCD Display , ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU ENTER [Setup] Wall ] ENTER [Screen Divider] ENTER [Video The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. · · · Select a mode in Screen Divider. The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. · · The Screen Scroll function scrolls the screen for the specified period of time. This function is not available when the power is turned off. ENTER [Setup] ENTER [Safety MENU Screen] Pixel Shift Pixel Shift MENU ENTER [Setup] Screen] ENTER [Pixel Shift] ENTER [Pixel Shift] , ENTER [Safety ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the PDP are moved in horizontal or vertical direction. Adjusting the LCD Display 1. Off On Horizontal Dot MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Horizontal Dot] , ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Vertical Line] , ENTER Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Time] , ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Adjusting the LCD Display Timer Timer MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Timer] , ENTER You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. Off On Mode MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Mode] , ENTER You can change the Safety Screen Type. Scroll Bar Eraser Period MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Period] , ENTER Adjusting the LCD Display Use this function to set the execution period for each mode set in the timer. Time MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Time] , ENTER Within the set period of time specify a time for execution. [. . . ] This system uses two carriers to transmit voice data. Countries such as South Korea and Germany use this system. Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system, including the United States, Canada, Chile, Venezuela and Taiwan. It also refers to the organization that has been organized to promote its development and management. [. . . ]