User manual SAMSUNG SYNCMASTER 400FP-2

[. . . ] SyncMaster 400FP-2, 460FP-2, 400FPn-2, 460FPn-2 LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. [. . . ] The next screen is for selecting a keyboard. 3. 4. Using the Software 5. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly. ) Set a vertical frequency for your monitor. (You can enter the frequency directly. ) Enter the model name of your monitor. This information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware. MDC Installation 1. Insert the installation CD into the CD-ROM drive. Note If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MDC executable file on the CD. When the Installation Shield Wizard window appears, click "Next". Select "I agree to the terms of the license agreement" to accept the terms of use. The "Installation Status" window appears. When the installation is complete, the MDC executable icon appears on your desktop. Double-click the icon to start the program. MDC execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MDC can be affected by such factors as the video card, motherboard and the network environment. Using the Software Uninstall The MDC program can be removed only by using the "Add or Remove Programs" option of the Windows® Control Panel. Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select MDC from the list and then click the "Add/Delete" button. Using MDC Adjusting the LCD Display Input Available Modes · · · · · · PC / BNC / DVI AV HDMI MagicInfo TV Component Note · · The TV menu is available when a TV tuner box is installed. The MagicInfo menu is available when a network box is installed. Source List MENU !' ENTER !' !' ENTER !' !' , !' ENTER Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. PC DVI AV Adjusting the LCD Display 4. HDMI This is deactivated when a TV tuner box is installed. 5. MagicInfo This is activated when a network box is installed in the HN or H model. 6. TV This is activated when a TV tuner box is installed. 7. BNC BNC mode is not supported if the component cable is connected. [. . . ] The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. [. . . ]