User manual SAMSUNG SYNCMASTER 400FXN

[. . . ] SyncMaster 400FX, 400FXn LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Prohibited Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] The Area function allows you to set the position where the movie is played and when and for how long it is played. The Screen function allows you to set the flash file and how to play it. The Background function allows you to set the background image and music when the flash file is played. The Effect function allows you to set the effect for when the background changes. If no flash player is installed on the PC where the server is installed, the operation may not be normal. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Flash File: Selects the flash file to be played in the Flash area. Aspect Ratio: Selects the aspect ratio for the flash file to be played in the Flash area. Full: The flash file is enlarged or reduced to fit the entire background. Original: The flash file is displayed at the original size. Auto: The flash file is enlarged or reduced to fit the entire background, and keeps the original aspect ratio. Input Enable: You can input using the mouse in the Flash area. Background Type: Sets the background type (Color, Picture File) for the Flash area. Color: Selects the color when the background type for the Flash area is set to Color. Transparency: Selects the degree of transparency when the background type for the Flash area is set to Color. If the Transparency is set to a value under 100, the area which is placed beneath the present area is shown transparently. However, if a Movie is playing in one of the areas, the transparency doesn't affect the movie area. Picture File: Selects the photo file when the background type for the Flash area is set to Picture File. Picture Aspect Ratio: Selects the aspect ratio for the photo file to be played in the Flash area when the background type of the Flash area is set to Picture File. [. . . ] Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. [. . . ]