User manual SAMSUNG SYNCMASTER 400P

[. . . ] Install Pro grams SyncMaster 400Pn/400P Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. [. . . ] 1) PIP - The direct button on the remote control is 'PIP' button. 2) Source - The direct button on the remote control is 'SOURCE' button. PC / DVI : AV / S-Video / Component Mode BNC : AV / S-Video Mode AV / S-Video : PC / BNC / DVI Mode Component : PC / DVI Mode : Select the input source for the PIP. 3) Swap - The direct button on the remote control is 'SWAP' button. : Swapping the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. 4) Size - The direct button on the remote control is 'SIZE' button. If you select , , in Size, Position and Transparency will not be activated. 5) Position : Change the Position of the PIP window. 6) Transparency High Medium Low Opaque : Adjust the Transparency of PIP windows. Available Mode : PIP Edit Name Name the input device connected to the input jacks to make your input source selection easier. 1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component 1) PIP 2) Source 3) Swap 4) Size 5) Position 6) Transparency Picture PC / BNC /DVI Mode Available Mode OSD MagicBrightTM : PC / BNC / DVI : AV : S-Video : Component : MagicNet Play Description MagicBrightTM is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBrightTM control button. - The direct button on the remote control is 'M/B' button. 1) Entertain : High brightness For watching motion pictures such as a DVD or VCD. 2) Internet : Medium brightness For working with a mixture of images such as text and graphics. 3) Text : Normal brightness For documentations or works involving heavy text. 4) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 2) Brightness : Adjust the Brightness. If you adjust picture using Custom function, MagicBright will turn to Custom mode. Color Tone The tone of the color can be changed. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]