User manual SAMSUNG 42HD43A

[. . . ] PROJECTION TELEVISION 42HD43A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner's Instructions BP68-00168A-00 Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] Channel : ANT Note: Only memorized channels can be set as Favorite channels. w To View Your Favorite Channels: Press the Fav. CH button repeatedly to jump from one favorite channel to another. 33 O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the Menu button. Press the CH button to select "Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 2 Press the CH button to select "Add/Erase", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 3 Press the VOL + button, then press CH / CH or number buttons to select the channel you want to add or erase. Press the Menu button. Channel Select Add/Erase : ANT 11 : Erased 4 Press the CH or CH button to select "Select". Press the VOL + or VOL button to select "Added" or "Erased". Press the Menu button to exit the menu. Channel Select Add/Erase : ANT 11 : Added 34 O P E R AT I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i. e. , "CBS", "ESPN", "PBS2", CNN1", etc. ) A label consists of four fields, where each field is a letter, a number, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. 1 Press CH or CH to tune to the channel that will be labeled. 2 Press the Menu button. Press the CH button to select "Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT Note: You cannot select "Labeling" in the A/V mode. w : 00 : ---- 3 Press the CH button to select "Labeling". Press the VOL + button to begin labeling. The left-most field will be highlighted. See top paragraph. ) Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 4 Press the CH or CH button to select a letter, a number, or a blank. (Press the CH or CH button results in this sequence: A, B, . . . Z, blank, 0, 1, . . . 9). Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : A--- 5 Press the VOL + button switch to the next field, which will be highlighted. Select a second letter or digit pressing the CH or CH button, as above. Repeat the process to select the last two digits. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 :ABC1 Press the Menu button to exit the menu. 35 O P E R AT I O N Picture Control You can use the on-screen menus to change the contrast, brightness, tint, color, and sharpness according to personal preference. (Alternatively, you can use one of the "automatic" settings. See next page. ) Customizing the Picture 1 Press the Menu button. The "Picture" icon will be highlighted, then press the VOL + or VOL - button repeatedly, until the word "Custom" is selected. Mode Adjust Size Digital NR Color tone Demonstration Picture : Custom : Wide : Off : Normal 2 Press the CH button to select "Adjust", then press the VOL + button. [. . . ] If your VCR (or DVD) turns on, your remote control is now set correctly. If your VCR (or DVD) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (or DVD). If no other codes are listed, try each code, 000 through 089. When your remote control is in the "VCR" (or DVD) mode, the volume buttons still control your TV's volume. When your remote is in the "TV" mode, the VCR control buttons (PLAY, PAUSE, etc. ) will still operate your VCR. w w 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (or DVD). 63 S P E C I A L F E AT U R E S Setting Up Your Remote Control to Operate Your Cable Box 1 Turn off your cable box. 2 Press the MODE button and make sure that the Cable LED is illuminated. The remote control has four "modes": "TV, " "VCR, " "CABLE" and "DVD. " Press the "MODE" button to switch the remote control to the "Cable" mode. w 3 On your remote control, press SET. 4 Enter 3 digits of the cable box code listed below for your brand of cable box. Make sure you enter 3 digits of the code, even if the first digit is a "0. " (If more than one code listed, try the first one. ) w 5 Press Power. [. . . ]