User manual SAMSUNG 45BN

[. . . ] Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. [. . . ] Use the adjustment buttons (+, ­) to increase or decrease the adjustment. The power indicator light blinks rapidly when a maximum setting is reached. Button Control Adjustment Effect Press Once Horizontal Position Horizontal screen position. ­ moves screen left + moves screen right ­ + Vertical Position Horizontal Size Horizontal screen size. ­ decreases size of screen image + increases size of screen image Vertical Size Vertical screen size ­ decrease size of screen image + increases size of screen image Pincushion Straightness of vertical edges. ­ curves image inward + curves image outward Trapezoid Width of top & bottom of screen. ­ widens bottom of screen image + widens top of screen image Brightness Background brightness of screen. ­ decreases brightness of screen + increases brightness of screen S S Contrast of screen image. ­ decreases contrast of screen image + increases contrast of screen image S S English - 3 Italiano Contrast Portuguese Deutsch Español Vertical screen position. ­ moves screen down + moves screen up Français English Operation EDel2. book Page 4 Monday, April 17, 2000 10:47 PM Operation Buttons Control Adjustment Effect Press both & Hold for 3 seconds Parallelogram AND ­ + Skews screen image. ­ skews to left + skews to right V-linearity AND Compression of image on screen. ­ compresses bottom of screen + compresses top of screen Pinbalance AND Curves of vertical lines. ­ curves lines to left + curves lines to right V-moiré AND Corrects for moiré pattern on screen. ­ Vertical moiré correction off + Vertical moiré correction on Degauss AND Removes color distortion caused by magnetic fields. Press brightness and contrast buttons once. Do not use more than once in 30 minutes. Recall AND Returns monitor controls to original settings. Press and hold trapezoid and contrast buttons for 3 seconds. User Delete AND Resets data in monitor's memory. Press and hold pincushion and contrast buttons for at least 5 seconds. Note: When you are finished adjusting your monitor using the control buttons, the power indicator light will blink once as the monitor automatically saves your changes. English - 4 EDel2. book Page 5 Monday, April 17, 2000 10:47 PM Before calling for service, check the information in this section to see if you can solve the problem yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer. [. . . ] Compliance with these directives implies conformity to the following European Norms: s EN55022 (CISPR 22) ­ Radio Frequency Interference s EN50082-1 : 1992 ­ Electromagnetic Immunity s EN60555-2 (IEC555-2) ­ Power Line Harmonics s EN60555-3 (IEC555-3) ­ Voltage Fluctuations s EN60950 (IEC950) ­ Product Safety. Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Portuguese Italiano Español IC Compliance Notice Deutsch Français English Regulatory Information EDel2. book Page 4 Monday, April 17, 2000 10:47 PM SAMTRON SEOUL 15TH FL, JOONGANG DAILY NEWS BLDG. 7, SOONHWA-DONG, CHUNG -KU, SEOUL, KOREA, 100-759 TEL : (82-2) 727-3114 SAMTRON U. S. A. [. . . ]