User manual SAMSUNG LN46E550F6F

[. . . ] ( MENU Displays the main on-screen menu. a P/DOWN/LEFT/ U RIGHT/ENTER Use to select on-screen menu items and change menu values. c DMA (Digital Media Adapter) DMA (Digital Media Adapter) Use this when connecting a SAMSUNG DMA device through an HDMI interface and switching to DMA mode. For more information on the operating procedures, refer to the user manual of the DMA. [. . . ] If your VCR is stereo, you must connect two cables. Audio Cable (Not supplied) Video Cable (Not supplied) 5 Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). S-Video Connection TV Side Panel TV Rear Panel VCR Rear Panel 2 3 2 3 RF Cable (Not supplied) S-Video Cable (Not supplied) Audio Cable (Not supplied) To begin, follow steps 1­3 in the previous section to connect the antenna or cable to your VCR and your TV. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV. An S-Video cable may be included with a VCR. (If not, check your local electronics store. ) Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. English-5 Connecting a Digital Audio System TV Rear Panel Digital Audio System Connect an Optical Cable between the "DIGITAL AUDIO OUT (OPTICAL)" jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the "DIGITAL AUDIO OUT (OPTICAL)" jack: Decrease the volume of the TV and adjust the volume level with the system's volume control. Optical Cable (Not supplied) 5. 1CH audio is possible when the TV is connected to an external device supporting 5. 1CH. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5. 1 channel sound to the Home theater receiver. · Cable: "Cable" antenna signal. · Auto: "Air" and "Cable" antenna signals. English- Setting the Channel List You can delete or add a channel to display the channels you want. Picture Mode · Dynamic: Selects the picture for high-definition in a bright room. · Standard: Selects the picture for the optimum display in a normal environment. · Movie: Selects the picture for viewing movies in a dark room. 2 3 4 Press the MENU button. Press the or button to select "Channel", then press the ENTER button. Press the or button to select "Channel List", then press the ENTER button. Press the button to select "Added Channels". Press the or button to select "All Channels". Press the or button to select a channel to delete, then press the TOOLS button. Press the ENTER button to select "Delete". Press the or button to select a channel to add, then press the TOOLS button. [. . . ] Compare these values with the data in the Display Modes. Please check the digital signal strength and input antenna. Make sure the broadcast you're receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. [. . . ]