User manual SAMSUNG SYNCMASTER 460DMN

[. . . ] SyncMaster 460DMn LCD Display User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. [. . . ] Off On Format MENU ENTER [Setup] Wall ] ENTER [Format] ENTER [Video Adjusting the LCD Display , ENTER The Format can be selected to see a divided screen. Full Provides a full screen without any margins. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU ENTER [Setup] Wall ] ENTER [Horizontal] ENTER [Video , ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU ENTER [Setup] Wall ] ENTER [Vertical] ENTER [Video , ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU ENTER [Setup] Wall ] ENTER [Screen Divider] ENTER [Video Adjusting the LCD Display The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. · · · Select a mode in Screen Divider. The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. · · The Safety Screen function scrolls the screen for the specified period of time. This function is not available when the power is turned off. MENU ENTER [Setup] ENTER [Safety Screen] Pixel Shift Pixel Shift MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Pixel Shift] , ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the LCD are moved in horizontal or vertical direction. Off On Note The Pixel Shift is not available when Video Wall is On. Adjusting the LCD Display Horizontal Dot MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Horizontal Dot] , ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Vertical Line] , ENTER Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Time] , ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Can be set between 1 and 10 hours. Adjusting the LCD Display Timer Timer MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Timer] , ENTER You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. Off On Mode MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Mode] , ENTER You can change the Safety Screen Type. Scroll Bar Eraser Period MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Period] , ENTER Adjusting the LCD Display Use this function to set the execution period for each mode set in the timer. Time MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Timer] ENTER [Time] , ENTER Within the set period of time specify a time for execution. · · Mode-Scroll : 1~5 sec Mode-Bar, Eraser : 10~50 sec Scroll MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Scroll] This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Bar] This function prevents after-images on the screen by moving long black and white vertical lines. Adjusting the LCD Display Eraser MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Eraser] This function prevents after-images on the screen by moving a rectangular pattern. Resolution Select Note · This function does not work for this LCD Display. ENTER MENU ENTER [Setup] [Resolution Select ] , ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Off 1024 X 768 1280 X 768 1360 x 768 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz. Adjusting the LCD Display Power On Adjustment MENU ENTER [Setup] [Power On Adjustment ] ENTER , ENTER Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage. Side Gray MENU ENTER [Setup] ENTER [Side Gray] , ENTER Select the brightness of the grey for the screen background. Off Light Dark Reset Reverts the product settings to factory defaults. [. . . ] The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. [. . . ]