User manual SAMSUNG 460TMN

[. . . ] SyncMaster 460TMn LCD Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. [. . . ] 28 Adjusting the LCD Display Lock On MENU ENTER ENTER ENTER [09] [09] [09] [09] This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings. Energy Saving MENU ENTER [Setup] ENTER [Energy Saving] , ENTER This feature adjusts the power consumption of the unit in order to save energy. Off On Note If you want to reduce the standby power consumption, set Energy Saving to On. However, when Energy Saving is On, you cannot use the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicInfo. HDMI Black Level MENU Level ] ENTER [Setup] ENTER [HDMI Black , ENTER When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, 29 Adjusting the LCD Display etc. , depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level. Normal Low Video Wall Note · This function does not work for this LCD Display. A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. MENU Wall ] Note When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode. ENTER [Setup] ENTER [Video Video Wall MENU ENTER [Setup] Wall ] ENTER [Video Wall ] ENTER [Video , ENTER Turns Off/On the Video Wall function of the selected display Off/On. Off On Format MENU ENTER [Setup] Wall ] ENTER [Format] ENTER [Video 30 Adjusting the LCD Display , ENTER The Format can be selected to see a divided screen. Full Provides a full screen without any margins. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU ENTER [Setup] Wall ] ENTER [Horizontal] ENTER [Video , ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU ENTER [Setup] Wall ] ENTER [Vertical] ENTER [Video , ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU ENTER [Setup] Wall ] ENTER [Screen Divider] ENTER [Video 31 Adjusting the LCD Display The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. · · · Select a mode in Screen Divider. The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. · · The Safety Screen function scrolls the screen for the specified period of time. This function is not available when the power is turned off. MENU ENTER [Setup] ENTER [Safety Screen] Pixel Shift Pixel Shift MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Pixel Shift] , ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the LCD are moved in horizontal or vertical direction. Off On Note The Pixel Shift is not available when Video Wall is On. 32 Adjusting the LCD Display Horizontal Dot MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Horizontal Dot] , ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU ENTER [Setup] ENTER [Safety Screen] ENTER [Pixel Shift] ENTER [Vertical Line] , ENTER Sets how many pixels the screen moves vertically. [. . . ] Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. [. . . ]