User manual SAMSUNG SYNCMASTER 460UXN-M

[. . . ] SyncMaster 400UXn, 460UXn LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] MENU ENTER , ENTER , ENTER , ENTER Adjusting the LCD Display Transparency Adjusts the Transparency of PIP windows. · · · · High Medium Low Opaque , ENTER , ENTER , ENTER MENU ENTER Edit Name Name the input device connected to the input jacks to make your input source selection easier. DVI AV S-Video Component HDMI , ENTER , ENTER , ENTER MENU ENTER Picture [PC / BNC / DVI Mode] Available Modes · · · · · · PC / BNC / DVI AV S-Video Component HDMI MagicInfo MagicBright MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright control button. Entertain High brightness For documentations or works involving heavy text. Adjusting the LCD Display 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. Text Normal brightness For documentations or works involving heavy text. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Note The direct button on the remote control is the 'M/B' button. MENU , ENTER ENTER , ENTER Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Adjusting the LCD Display MENU , ENTER , ENTER ENTER , /, ENTER Color Tone The color tones can be changed. Off Cool Normal Warm Custom (Available in PC, BNC mode only) Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled. If you set the Color Tone to Off, the Color Control function is disabled MENU , ENTER , ENTER , ENTER Adjusting the LCD Display Color Control Adjusts individual Red, Green, Blue color balance. Red Green Blue Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. MENU , ENTER , ENTER ENTER , ENTER Color Temp Adjusting the LCD Display Color Temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. MENU , ENTER , ENTER , ENTER Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC, BNC mode only) Coarse Removes noise such as vertical stripes. [. . . ] The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. [. . . ]