User manual SAMSUNG 460UXN-M DOC(DECLARATION OF CONFORMITY)

[. . . ] Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, push the button to adjust volume. [. . . ] ( Dynamic Standard Movie Custom ) PC / DVI / BNC : M/B (MagicBright) MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (Entertain Internet Text Custom ) 13. AUTO Adjusts the screen display automatically in PC mode. By changing the resolution in the control panel, auto function is performed. Returns to the immediately previous channel. - This fuction does not work for this LCD Display. 14. ENTER/PRE-CH 15. CH/P In TV mode, selects TV channels. Introduction - This fuction does not work for this LCD Display. SOURCE INFO EXIT Changes the video source. The current picture information is displayed in the top left corner of the screen. Moves from one menu item to another horizontally, vertically or adjusts selected menu values. When pressing this button, the current mode is displayed at the bottom centre of the screen. SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. · · Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation · · · Contact a technician for installing the wall bracket. SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Components Only use the components and accessories shipped with the product. Introduction Wall Bracket(1) Hinge(Left 1, Right Plastic 1) Hanger (4) Screw (A)(11) Screw(B) Anchor (4) (11) Wall Bracket Assembly Note There are two hinges(left and right). Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. There are two hinges(left and right). Captive Screw Wall Bracket Hinge (Left) Hinge (Right) Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length. Introduction A3. Length between the two locking holes Check the installation diagram and mark the drill points on the wall. Use the 5. 0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. To mount the product on the wall bracket The shape of the product may vary depending on the model. [. . . ] If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. Adjusts the Treble and Bass to the appropriate levels. Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed. Q: A: A: A: The remote control buttons do not respond. Check the polarities (+/-) of the batteries. [. . . ]