User manual SAMSUNG UN65ES8000F

[. . . ] To make a selection, press the ENTERE button. To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps: 5 After the TV has memorized the channels, choose the Clock Mode. [. . . ] For a vibrant, enhanced image in brightly lit or sunny room. For a bright, detailed picture in a normally lit room. For a comfortable, easy-on-the-eyes picture in a normally lit room. For a studio quality cinema picture in a dimly lit or dark room. 16:9 Wide screen 4:3 Standard screen Wide Fit 2 Select Home Use, and then press To change the Picture Mode, follow these steps: 1. Turn on your TV, press the TOOLS button on your remote. Using the or on your remote, select Picture Mode. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. Press the EXIT button to exit the menu. the ENTERE button. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes. 9 The Enjoy your TV. Then press the ENTERE button. Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Quickly select frequently used functions. These buttons are for the Channel list, Internet@TV, Media Play menu, etc. CONTENT TOOLS CH LIST MENU @TV INTERNET INFO Returns to the previous channel. PRE-CH MUTE Cuts off the sound temporarily. Displays the channel list on the screen. Selects the on-screen menu items and changes the values seen on the menu. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). FAV. CH: Displays Favorite Channel Lists on the screen. CC: Controls the caption decoder. Modem Cable (Not Supplied) LAN Cable (Not Supplied) The LAN Port on the Wall TV Rear Panel LAN Cable (Not Supplied) Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung's Wireless LAN adapter supports the IEEE 802. 11A/B/G and N communication protocols. When you play the video over a IEEE 802. 11B/G connection, the video may not play smoothly. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer) to transmit an encrypted security code called an access key. If Pure High-throughput (Greenfield) 802. 11N mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. Configuring the Network Connection - Wired Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. [. . . ] Turn on your TV, press the MENU button on your remote, and the select Setup Network. Set the Network Type to Wireless if it is not already set to Wireless. On the Network Setup menu, select an AP (Access Point) or ad hoc network. If you have selected a network with a security key, the Security Key screen appears. [. . . ]