User manual SAMSUNG SYNCMASTER 700TSN-2

[. . . ] LCD DISPLAY quick start guide 700TSn-2, 820TSn-2 Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Unpacking LCD Display Manuals Quick Setup Guide Warranty Card (Not available in all locations) User's Guide, MagicInfo Software CD, MagicInfo Manual CD Cables Power Cord Others Remote Control Batteries (AAA X 2) Ferrite Core for LAN cable Introduction Package Contents Note Please make sure the following items are included with your LCD Display. [. . . ] · Connect the DVI Cable to the DVI IN port on the back of your LCD Display and the DVI port on the computer. 29 Connections Using the HDMI (digital) output on the graphics card. · Connect the HDMI IN port on the monitor to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted. Note that sound is only available when connected according to the option that follows. Connect the audio cable for your LCD Display to the audio port on the back of the LCD Display. Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Turn on the power switch. Note · · Turn on both your computer and the LCD Display. Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices · AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. 30 Connections · The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. Connecting AV Devices 1. 3. Connect the Video and [R-AUDIO-L] port of the DVD, VCR or DTV Set-Top Box to the Video and [R-AUDIO-L] LCD Display. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted. Select AV using the SOURCE . Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display . Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display . Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control. Then, start the Camcorder with a tape inserted. 2. 4. 31 Connections Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store. ) If your camcorder is stereo, you need to connect a set of two cables. Connecting Using a DVI Cable 1. 3. Connect between the DVI OUT port on the LCD Display and the input port on another monitor using a DVI cable. Connect between the AUDIO OUT port on the LCD Display and the audio input port on another monitor using a stereo cable. Select DVI using the SOURCE button on the front of the LCD Display or on the remote control. Note DVI OUT does not support HDCP. Connecting Using a HDMI Cable 1. Connect input devices such as a Blu-Ray/DVD player to the HDMI IN terminal of the LCD Display using an HDMI cable. [. . . ] Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity. Q&A Q: A: How can I change the frequency?The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. [. . . ]