User manual SAMSUNG SYNCMASTER 710NT

[. . . ] SyncMaster 710NT Install drivers Install programs Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. [. . . ] [AUTO] Press to Self-Adjusts the incoming PC signal automatically. The values of fine, coarse and position are adjusted automatically. AUTO Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) AUTO To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock >> AUTO button >> MENU button Menu Description After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. OSD Lock & Unlock MagicBrightTM Menu MagicBrightTM Description Push the MagicBright button to circle through available preconfigured modes. - Six different modes (Custom/Text/Internet/Game/Sport/Movie) Volume Menu Volume [ ] Description When OSD is not on the screen, push the button to adjust volume. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off. Picture Color Image OSD Setup Information Brightness MagicColor Coarse Language Image Reset Contrast Color Tone Fine H-Position Color Reset Color Control Sharpness V-Position Gamma H-Position Transparency V-Position Display Time Picture Menu Description You can use the on-screen menus to change the brightness according to personal preference. Play/Stop Brightness Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness. MENU , MENU Contrast You can use the on-screen menus to change the contrast according to personal preference. (Not available in MagicColor mode of Full and Intelligent. ) MENU , , MENU Color Menu Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 2) Demo - The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. 3) Full - Displays not only vivid natural color but also more realistic natural skin color with clearness. 4) Intelligent - Displays vivid natural color with clearness. 5) MagicZone - The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness, sharpness, saturation, hue of a certain area on the screen. Especially, MagicZone is appropriate to using the moving picture. Hue : This function is to adjust the hue of the MagicZone. Saturation : This function is to adjust the saturation of the MagicZone. Brightness : This function is to adjust the brightness of the MagicZone. Sharpness : This function is to adjust the sharpness of the MagicZone. H-Position : This function is to move the MagicZone horizontally. V-Position : This function is to move the MagicZone vertically. H-Size : This function is to adjust the horizontal size of the MagicZone. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]