Detailed instructions for use are in the User's Guide.
[. . . ] SAMTRON 52V/72V
User's Manual
Safety Instructions
Notational
Warning/Caution
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.
Notation Conventions
Prohibited
Important to read and understand at all times
Do not disassemble
Disconnect the plug from the outlet
Do not touch
Grounding to prevent an electric shock
User's Manual
Safety Instructions
Power
When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode.
·
Do not use a damaged or loose plug.
·
This may cause an electric shock or fire.
·
Do not pull the plug out by the wire nor touch the plug with wet hands.
·
This may cause an electric shock or fire.
·
Use only a properly grounded plug and recepticle.
·
An improper ground may cause electric shock or equipment damage
·
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
·
Failure to do so may cause an electric shock or fire.
User's Manual
Safety Instructions
Power
·
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time.
·
Failure to do so may cause an electric shock or fire.
·
Do not connect too many extension cords or plugs to an outlet.
·
This may cause a fire.
User's Manual
Safety Instructions
Installation
·
Do not cover the vents on the monitor cabinet.
·
Bad ventilation may cause a breakdown or fire.
·
Put your monitor in a location with low humidity and a minimum of dust.
·
An electric shock or fire could result inside the monitor.
·
Do not drop the monitor when moving it.
·
This may cause damage to the product or human body.
·
Place the monitor on a flat and stable surface.
·
The monitor can cause injury by falling.
·
Set down the monitor carefully.
·
It could be damaged or broken.
User's Manual
Safety Instructions
Installation
·
Do not place the monitor face down.
·
The TFT-LCD surface may be damaged.
User's Manual
Safety Instructions
Clean
When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric.
·
Do not spray detergent directly on the monitor.
·
Use the recommended detergent with a smooth cloth.
·
If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.
·
A dirty connector can cause an electric shock or fire
·
Do not set a glass of water, chemicals or any small metal objects on the monitor.
· ·
This may cause damage, electric shock or a fire. If a foreign substance gets into the monitor, disconnect the plug and then contact a service center.
User's Manual
Safety Instructions
Other
·
Do not remove cover(or back). No user serviceable parts inside.
· ·
This may cause an electric shock or a fire. [. . . ] Refer to the video card manual and adjust the screen as follows. Preset Timing Modes
Display Mode
IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768
Horizontal Frequency (kHz)
31. 469 31. 469 31. 469 37. 500 37. 861 35. 156 37. 879 46. 875 48. 077 48. 363 56. 476 60. 023
Vertical Frequency (Hz)
70. 086 59. 940 70. 087 75. 000 72. 809 56. 250 60. 317 75. 000 72. 188 60. 004 56. 476 75. 029
Pixel Clock (MHz)
25. 175 25. 175 28. 322 31. 500 31. 500 36. 000 40. 000 49. 500 50. 000 65. 000 75. 000 78. 750 -/-/-/+ -/-/-
Sync Polarity (H/V)
+, -/+, +/+ +/+ +/+ -/-/+/+
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
User's Manual
Specifications
General
General Model Name LCD Panel Size Display area Pixel Pitch Type Viewing Angle Synchronization Horizontal Vertical Display Color 16, 294, 277 colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog 0. 7 Vpp positive at 75 ohms Separate H/V sync, Composite, TTL level positive or negative Maximum Pixel Clock 135 MHz Power Supply AC 90 ~ 264 VAC rms, 60/50 Hz ± 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable Power Consumption 45W (Maximum) Dimensions (WxDxH) 380. 0 x 59. 0 x 322. 0 mm (Without Stand) 380. 0 x 176. 2 x 387. 5 mm (With Simple Stand) Weight 4. 8kg (With Simple Stand) VESA Mounting Interface 100mm x 100mm (for use with Specialty(Arm) Mounting hardware. ) Environmental considerations Operating Storage Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing Temperature: -4°F ~113°F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-condensing 1280 x 1024@60Hz 1280 x 1024@75Hz 31 ~ 81 kHz 56 ~ 75 Hz 17. 0 inch diagonal 337. 92 (H) x 270. 336 (V) 0. 264 (H) x 0. 264 (V) a-si TFT active matrix 140/120(L, R/T, B) SAMTRON 72V
User's Manual
Specifications
General
Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99. 999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. of TFT LCD pixels that is contained in this product are 3, 932, 160. Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.
User's Manual
Specifications
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. State Power Indicator Power Consumption Normal Operation Green Less than 45W Power saving mode EPA/ENERGY 2000 Green, Blinking Less than 2W Power Switch off (110Vac) Black Less than 1W
This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.
User's Manual
Specifications
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Preset Timing Modes
Horizontal Frequency (kHz) 31. 469 31. 469 31. 469 37. 500 37. 861 35. 000 49. 726 35. 156 37. 879 46. 875 48. 077 48. 363 56. 476 60. 023 63. 981 79. 976 Vertical Frequency (Hz) 70. 086 59. 940 70. 087 75. 000 72. 809 66. 667 74. 551 56. 250 60. 317 75. 000 72. 188 60. 004 70. 069 75. 029 60. 020 75. 025 Pixel Clock (MHz) 25. 175 25. 175 28. 322 31. 500 31. 500 30. 240 57. 284 36. 000 40. 000 49. 500 50. 000 65. 000 75. 000 78. 750 108. 00 135. 00 Sync Polarity (H/V) +/-/-/+ -/-/-/-/+, -/+, +/+ +/+ +/+ -/-/+/+ +/+ +/+
Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 VESA, 640 x 480 VESA, 640 x 480 MAC. , 640 x 480 MAC. , 832 x 624 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1280 x 1024 VESA, 1280 x 1024
Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. [. . . ] If in doubt, consult the technical services department or your local representative. Temperature Range of -40°C to +70°C Relative Humidity of 10 -95%, non-condensing
* Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
Transport and Storage Limitations:
User's Manual
Information
For Better Display
1. Adjust computer resolution and screen injection rate (refresh rate) in control panel of computer as described below to enjoy the best quality of picture. [. . . ]