User manual SAMSUNG SYNCMASTER 770-TFT

[. . . ] SyncMaster 770TFT SyncMaster 870TFT SyncMaster 170T TFT-LCD Monitor Owner's Instructions Information in this document is subject to change without notice. © 2000 Samsung Electronics Co. , Ltd. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co. , Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] The Fine and Coarse adjustments allow you to more closely adjust your monitor to your preference. Use the "­, +" buttons to adjust away interference. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. This function may change the width of the display image. Use the Horizontal function on the Position menu to center the display image on the screen. Position: s Horizontal s Vertical Color Control: R(ed) s G(reen) s B(lue) s Position moves the viewing area around on the monitor screen. Color Controls adjust the color hue and saturation. The color hue is most noticeable in areas of white. English 14 Table 1. Menu Adjustments (Continued ) Icon Settings and Sub-menus Description English 15 Italiano Menu Display Time: s 5 Seconds s 10 Seconds s 20 Seconds s 200 Seconds The OSD stays active for as long as it is in use. Menu Display Time sets the length of time the OSD will remain active after the last time you pushed a button. Portuguese Language: s English s Deutsch s Español s Français s Italiano s Svenska Language sets the OSD to display in one of six languages (English, French, German, Spanish, Italian, or Swedish). The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Deutsch Menu Effect: Half Tone s On s Off Half Tone changes the opaqueness of OSD background when Half Tone is "on", the background of OSD menu becomes half-transparent. Español Image Size: s Normal s Expanded 1 s Expanded 2 If your computer or video board supplies a signal rate and addressability lower than 1280 x 1024, this LCD Monitor provides a scaling processor that can expand the addressability up to 1280 x 1024. Select the Normal setting to use the normal size viewing area for the current signal. Expanded 1 expands the viewing area to the full width of the monitor screen. Expanded 2 extends the viewing area both horizontally and vertically to the full size of the monitor screen. Français s Reset: Geometry s Color Reset controls return the settings to the factory preset values for the selected group of functions. Geometry changes the Position settings, Image Lock settings and changes the Image Size to Expand 2. Color changes the RGB settings back to their original factory settings. English Adjusting Your LCD Monitor Adjusting Your LCD Monitor Table 1. Menu Adjustments (Continued ) Icon Settings and Sub-menus Description Menu Position: s Horizontal s Vertical i Display Mode: Each time the OSD opens it displays in the same location on the screen. Select this icon to view the current user mode. This screen only displays information; you cannot select a new setting. English 16 PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are "On", "Standby", "Sleep", and "Deep Sleep". PowerSaver operates with a VESA DPMS compliant video card installed in your computer. [. . . ] Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: s EN55022:1998 ­ Radio Frequency Interference s EN55024:1998 ­ Electromagnetic Immunity s EN61000-3-2:1995 + A1 + A2 ­ Power Line Harmonics s EN61000-3-3:1995 ­ Voltage Fluctuations s EN60950 ­ Product Safety. Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U. S. A. : Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 Tel. [. . . ]