User manual SAMSUNG SYNCMASTER 911LT

[. . . ] ! ! ! ! SyncMaster 711LT/ 911LT Install drivers Install programs Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged power cord or plug or a damaged or loose power outlet. Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. [. . . ] Do not send Motion Events: This saves bandwidth, although some Windows applications may rely on receiving mouse motion. Speed Level: It changes default bandwidth performance behavior for RDPv5. By default only theming is enabled, and all other options are disabled (corresponding to modem (56 Kbps)). Setting experience to broadband enables menu animations and full window dragging. Setting experience to LAN will also enable the desktop wallpaper. Setting experience to modem disables all (including themes). Drive Mapping If you have mass storage devices attached, make them available to the user by mapping them here. Press the "Add" button, select the drive name, type and base directory (where device is mounted on local system) to be used finally press "OK" button to map it (see picture). The server requires Windows XP or newer. The share name is limited to 8 characters. Device Mapping As well as locally attached mass storage devices, you may also map the local COM ports of the Thin Client into the RDP session. Enable COM port mapping and add the wanted port. /dev/ttyS0 stands for COM1 and /dev/ttyS1 for COM2. VNC You can configure VNC Client settings for a particular session as given below: General The General tab of the VNC Settings has the following connection information to be provided at the time of connection: Name: Provide Name by which you want the connection to be identified. Server: Provide IP address of the server whom you want to connect to. Automatic Logon: Select if you want to logon automatically. Password: - Password to be used for connecting to the system. Display The Display tab of the VNC Connection Manager has the following display properties to be set while connecting to the remote desktop / server Screen Size: - Size of the window when connection is established. Color Depth: - Color depth to be used while connecting to the server. Input "View Only" Specifies that no keyboard or mouse events should be sent to the server. It is a useful feature if you want to view a desktop without interfering. Misc Shared: When you make a connection to a VNC server, all other existing connections are normally closed. [. . . ] All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. During normal operation of a LCD panel, pixel image retention doesn't occur. [. . . ]