User manual SAMSUNG SYNCMASTER 913B

[. . . ] SyncMaster 913N/915N/912T/913T/913B Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. [. . . ] Click the "Add/Remove Programs" icon in Control Panel. In the "Add/Remove Programs" screen, scroll down to find "MagicRotation" Click on it to highlight it. Click the "Change/Remove" button to remove the program. Click "Yes" to begin the uninstall process. Wait until the "Uninstall Complete" dialog box appears. After unistall restart the system to complete the uninstallation. 2. 7. Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades. * WindowsTM is registered trademark of Microsoft Corporation, Inc. Overview | Installation | Interface | Uninstall | Troubleshooting Troubleshooting Before You Call Technical Support MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display Driver" is working incorrectly or has bugs in it, then these bugs would still exist even after MagicRotation Software is installed. Any incorrect/random behaviour resulting due to problems in the installed "Display Driver" are not due MagicRotation Software. In order to verify if a problem exists in the installed "Display Driver" , you can perform the following diagonostic steps : 1. Check if the problem is occuring in both 0 orientation (Landscape mode) and 90 orientation (Portarit mode). Check if the problem occurs with different color depths (8/16/32 bits per pixel) and different resolution modes (800 x 600, 1024 x 768). Check if the problem occurs without installing MagicRotation Software. If the problem is repeating in any/all of the following scenarios then it may be the problem with your installed "Display Driver" : In order to correct the problem you need to perform the following steps : 1. Obtain the latest "Display Driver" from your Graphic Card Vendor. The latest "Display Driver" from (ATI, NVIDIA, MATROX, INTEL, etc. ) are easily available for download from their respective websites. Install the latest "Display Driver" Install MagicRotation Software. In most of the cases this should correct the problem. 3. 4. MagicRotation may not work in case monitor is replaced or driver of graphic card is updated while MagicRotation is operating. If so, please restart the system. Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades. SyncMaster 913N / 915N Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? [. . . ] However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. [. . . ]