User manual SAMSUNG SYNCMASTER 930ND

[. . . ] SyncMaster 930ND LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] · · · · · Configuration Diagnostics Information User Settings Password Selecting one of the selections will produce a settings window. Using the Software Configuration The Configuration window allows the administrator to access the window tabs with settings that define how the Portal operates and interacts with its environment. The tabs in the Configuration window are: · · · · · · · · · Network Discovery Connection Management Session Bandwidth RDP Language OSD Reset All settings in the configuration tabs are password protected. Select the Unlock button in the bottom left corner of the Configuration window, enter password and select the OK button to unlock the settings. Each tab has an associated OK, Cancel and Apply button to accept or cancel the setting update. Network The Network tab allows an administrator to set the Portal network parameters. Using the Software · Enable DHCP When Enable DHCP is enabled, the device will contact a DHCP server to be assigned an IP address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires these parameters to be set manually. · IP Address The IP Address field is the device's IP address. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it. · Subnet Mask The Subnet Mask filed is the device's subnet mask. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid subnet mask, and if an invalid subnet mask is entered, the OSD will prompt the administrator to correct it. · Gateway The Gateway field is the device's gateway IP address. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it. · Primary DNS Server The Primary DNS Server field is the device's primary DNS IP address. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it. · Secondary DNS Server The Secondary DNS Server field is the device's secondary DNS IP address. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it. · VLAN Tag The VLAN Tag option is not currently implemented. Using the Software · Ethernet Mode The Ethernet Mode field configures the Ethernet mode of the Portal. The options are: Auto 10 Mbps Full-Duplex 100 Mbps Full-Duplex Connection Management The Connection Management tab allows enabling or disabling connection management, and to specify the IP address of the connection manager. In a managed connection, an external Connection Managerment Server communicates with and can remotely control and configure the device. [. . . ] The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. [. . . ]