User manual SAMSUNG SYNCMASTER 941MW

[. . . ] SyncMaster 941MW / 941MG Install Driver Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged or loose plug. ! This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. ! This may cause electric shock or fire. Use only a properly grounded plug and receptacle. ! An improper ground may cause electric shock or equipment damage. (Class l Equipment only. ) Insert the power plug firmly so that it does not come loose. ! A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. ! This may cause electric shock or fire. Do not connect too many extension cords or plugs to one outlet. ! This may cause fire. Do not disconnect the power cord while using the monitor. ! A surge may be caused by the separation and may damage the monitor. Do not use the power cord when the connector or plug is dusty. ! [. . . ] Available : PIP ON Size PIP Picture TV / Ext. / AV / S-Video / Component Mode Available Mode : PC / DVI : TV : Ext. : AV : S-Video : Component The default setting may be different depending on the selected Input Mode (input signal SOURCE selected in External Input List) and the selected resolution. OSD Mode Description The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings. Play / Stop - The direct button on the remote control is the 'P. MODE' button. 1) Dynamic 2) Standard 3) Movie 4) Custom Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 3) Sharpness : Adjusts the picture sharpness. 5) Tint : Adds a natural tone to the display. The Tint is connected by switching to NTSC from PAL broadcasting and is displayed on the menu while watching. But it is not displayed when watching a general PAL broadcast. For more information, see Broadcasting system by Country. Colour Tone The tone of the colour can be changed. The individual colour components are also user adjustable. 1) Cool2 2) Cool1 3) Normal 4) Warm1 5) Warm2 Size You can switch the Size. The direct button on the remote control is 'P. SIZE' button. / AV / S-Video mode : Auto Wide / Wide / 16:9 / Zoom1 / Zoom2 / 4:3 !Component mode: Wide / 16:9 / Zoom1 / Zoom2 / 4:3 Sound Available Mode : PC / DVI : TV : Ext. : AV : S-Video : Component The default setting may be different depending on the selected Input Mode (input signal SOURCE selected in External Input List) and the selected resolution. OSD Mode Description The Monitor has a built-in high fidelity stereo amplifier. The direct button on the remote control is 'S. MODE' button. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos or concerts. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]