User manual SAMSUNG AC160CB

[. . . ] x Make sure that the product is used in a location that ensures enough space(at least 5 cm) in front of the air inlet. x Make sure that there are no obstacles near the air inlet and outlet of the product. x If a strange noise, burning smell or smoke come from the product, disconnect the power supply immediately and consult with an authorized service personnel. x Do not use this product except purifying air. [. . . ] x The chapter "View of the Unit" is shown from pages 4 to 6: It will help you find the buttons and understand the symbols that are displayed. x In the manual, you will find a series of step-by-step procedures for each function available. Three types of symbols are used to help you understand the illustrations in the step-by-step procedures : PRESS PUSH HOLD DOWN E-7 ENGLISH Selecting the Auto Mode In the Auto mode, the air cleaner operates according to the contamination level. In this mode, the optimum fan speed is adjusted automatically and the Bionizer function is selected automatically. 1 If necessary, press the Result: (Power) button. x The air cleaner runs in the Auto mode. x The air cleaner makes a ringing sound. 2 If the is not displayed on the control part, select the Auto mode by pressing the button until it is displayed on the control part of the air cleaner. x The air cleaner operates in the Auto mode. You can change modes at any time. Note 3 To adjust the Bionizer function, refer to page 11. E-8 Selecting the Turbo Mode ENGLISH In the Turbo mode, you can clean the air as quickly as possible. The fan in the air cleaner turns in the fastest setting to clean the air. The Bionizer function is selected automatically. 1 If necessary, press the Result: (Power) button. x The air cleaner runs in the Auto mode. x The air cleaner makes a ringing sound. 2 If the is not displayed on the control part, select the Turbo mode by pressing the button until it is displayed on the control part. x The air cleaner operates in the Turbo mode. You can change modes at any time. Note 3 To adjust the Bionizer function, refer to page 11. E-9 Selecting the Sleep Mode If you wish the air cleaner to clean the air in your room quietly, select the Sleep mode. In this mode, the air cleaner runs in the quietest setting and the Bionizer function is selected automatically. 1 If necessary, press the Result: (Power) button. x The air cleaner runs in the Auto mode. x The air cleaner makes a ringing sound. 2 If the is not displayed on the control part, select the Sleep mode by pressing the button until it is displayed on the control part. x The air cleaner operates in the Sleep mode. You can change modes at any time. 3 To adjust the Bionizer function, refer to page 11. Note In the Sleep mode, the display brightness gets dimmer so that it may not disturb your sleep. E-10 Generating Anions ENGLISH Bionizer generates anions, which are beneficial to the human body. Use this function if you want to feel refreshed both physically and mentally, just as if you were in the midst of a forest. If the air cleaner is turned on, the Bionizer function is selected automatically. 1 If necessary, press the Result: (Power) button. x The air cleaner runs in the Auto mode. [. . . ] It must be dried only under the sunlight every 6 months. 3 After pushing the Photocatalyst filter and the Washable Filter Section back into the place, assemble the front panel. Photocatalyst filter E-13 ENGLISH Solving Common Problems Before contacting the after-sales service, perform the following simple checks. This may prevent you from making an unnecessary call and wasting your time and money. Problem The air cleaner does not operate. x x x x Explanation/Solution Check for a power failure. [. . . ]