User manual SAMSUNG AC340B

[. . . ] OWNER'S INSTRUCTIONS AC340B AC340BR AC340BG Air Cleaner E DB98-13335A(1) Safety Precautions The following safety precautions must be taken into account when using this product. N Do not install this product in places where it will come into contact with combustible gases such as sulfuric gas, hydrogen gas, methane gas, etc. N Do not install this product in places that are exposed to direct sunlight, near heating equipments and wet places. N When installing the electric wires, do not bend the wire excessively or place a heavy object on it. [. . . ] You can change modes at any time. Note 3 To adjust the clean level, refer to page 12. To adjust the generating anions, refer to page 11. E-8 Selecting the Sleep Mode If you wish the air cleaner to clean the air in your room quietly, select the Sleep Mode. In this operating mode, the air cleaner runs in "Low Speed" which is the quietest clean level setting. Anions are generated into an air automatically and the air flow blade does not move. 1 If necessary, press the Result: (Power) button. N The Power indicator on the display comes on. N The air cleaner runs in the Auto Mode. N The air cleaner makes a ringing sound. 2 If the the Result: is not displayed on the display, select the Sleep mode by pressing button until it is displayed on the display. N The air cleaner operates in the Sleep mode. You can change modes at any time. Note 3 To adjust the clean level, refer to page 12. To adjust the generating anions, refer to page 11. Note The brightness of the display during the Sleep Mode N In the Sleep Mode, the brightness of the display decreases so that it may not disturb your sleep. E-9 Selecting the Odor Mode If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and harmful smells effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the signal of the odor contamination level without the dusts and motes contamination level in the indoor air. Anions are generated automatically and the air flow blade moves automatically. 1 If necessary, press the Result: (Power) button. N The Power indicator on the display comes on. N The air cleaner runs in the Auto Mode. N The air cleaner makes a ringing sound. 2 If the the Result: is not displayed on the display, select the Odor mode by pressing button until it is displayed on the display. N The air cleaner operates in the Odor mode. You can change modes at any time. Note 3 To adjust the clean level, refer to page 12. To adjust the generating anions, refer to page 11. E-10 Generating Anions The Anion Generator generates anions, which are beneficial to the human body. Use this function if you want to feel refreshed both physically and mentally, just as if you were in the midst of a forest. If the air cleaner is turned on, anions are generated automatically. 1 If necessary, press the Result: (Power) button. N The Power indicator on the display comes on. N The air cleaner runs in the Auto Mode. [. . . ] N You can purchase new photocatalyst filters in the authorized service center. Don't wash the photocatalyst filter. It must be dried only under the sunlight every six months. IMPORTANT Photocatalyst filter 3 After pushing the Recovery Filter Section back into the place, close the Filter Box. E-16 Solving Common Problems Before contacting the after-sales service, perform the following simple checks. This may prevent you from making an unnecessary call and wasting your time and money. [. . . ]