User manual SAMSUNG AM18A1E2

[. . . ] OWNER'S INSTRUCTIONS Indoor Unit AM14A1(B1)E07 AM18A1(B1)E09 AM18A1(B1)B09 AM19A1(B1)E07 AM19A1(B1)E12 AM20A1(B1)E06 AM20A1(B1)E09 AM24A1(B1)E12 AM26A1(B1)B13 Outdoor Unit UM14A1(B1)E2 UM18A1(B1)E2 UM18A1(B1)B2 UM19A1(B1)E2 UM20A1(B1)E3 UM24A1(B1)E2 UM26A1(B1)B2 MULTI-SPLIT TYPE ROOM AIR CONDITIONER (Cool) E NL DB68-00811A(1) Safety Precautions The following safety precautions must be taken when using your air conditioner. 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. [. . . ] Result: Note x The indoor unit beeps each time you press MODE . x The air conditioner starts up in AUTO mode. You can change modes at any time. MODE TURBO OFF 3 To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature. ), press the or buttons one or more times. -2°C ( ) ( -1°C < When you feel hot > < When you feel chilly > MODE TURBO OFF E-9 Cooling Your Room You must select the Cool mode if you wish to adjust the: x Cooling temperature x Fan speed when cooling 1 If necessary, press the Result: (On/Off) button. MODE TURBO OFF x The OPERATION indicator on the indoor unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped It will start up normally after a three-minute. IM IMPORTANT 2 If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press x The air conditioner starts up in Cool mode. N o t e You can change modes at any time. MODE . MODE TURBO OFF 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x The indoor unit beeps each time you press x The air conditioner starts up in Dry mode. N o t e You can change modes at any time. MODE . MODE TURBO OFF 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x Each time you press or : - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. MODE TURBO OFF 4 To control the direction of the air flow, refer to page 14. E-12 Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: (On/Off) button. x The OPERATION indicator on the indoor unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The indoor unit beeps. MODE TURBO OFF 2 If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press MODE . x The FAN indicator on the indoor unit lights up. x The air conditioner starts up in Fan mode. You can change modes at any time. Note MODE TURBO OFF 3 Select the fan speed by pressing the the required setting is displayed: Low Medium High Result: Each time you press button one or more times until , the indoor unit beeps. 4 To control the direction of the air flow, refer to page 14. E-13 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the button under the remote control flap one or more times as required. Result: The outer blade is adjusted vertically. [. . . ] Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. x Check that the OPERATION indicator on the indoor unit is on; if necessary press (On/Off) on the remote control. x Check whether the TIMER indicator on the indoor unit is switched on. If so: - Wait until the switch-on time is reached and the air conditioner starts up automatically - Cancel the timer (see page 17 for further details) x Check that there are no obstacles between you and the indoor unit. [. . . ]