User manual SAMSUNG APC523QF

[. . . ] USER'S MANUAL APC503QG APC523QF APC553QF AP50Q0A AP55Q0A FLOOR STAND TYPE AIR CONDITIONER ( Cooling ) E A DB98-18974A(4) Register your product at www. samsung. com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. · Disconnect all remote electric power supplies before servicing, installing or cleaning. · This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. x Users of this product are cautioned not to attempt repair of this product at their own discretion. [. . . ] x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. x If the room temperature reachs the set temperature, the air conditioner stops cooling, but the fan is still operating. 4 Select the fan speed by pressing the button on the remote control or button one or more times until the required setting is displayed : Automatic(rotated : Low Medium High Result: x Each time you press the button, the indoor unit beeps. ) 5 To control the direction of the air flow, refer to page 16. E-9 Selecting the Automatic Operating Mode You can start the air conditioner in the Automatic mode from your remote control. In the Automatic mode, the temperature and the optimum fan speed is selected automatically. 1 If necessary, press the Result: (On/Off) button. x The power indicator on the control panel comes on. x The air conditioner starts up in the Cool mode. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Switched on x Stopped lt will start up normally after three minutes. button on the button. IMPORTANT 2 If the is not displayed on the control panel, press the remote control one or more times until it appears. Result: Note x The indoor unit beeps each time you press the x The air conditioner runs in the Auto mode. You can change modes at any time. 3 To control the direction of the air flow, refer to page 16. Note To adjust the temperature, press the buttons. The temperature will be adjusted and the mode will be changed with the Cool mode. E-10 Changing the Room Temperature Quickly The Turbo function is used to cool your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum setting before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. x The power indicator on the control panel comes on. x The air conditioner starts up in the Cool mode. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Switched on x Stopped lt will start up normally after three minutes. x The air conditioner cools the room as quickly as possible. x The temperature and fan settings are adjusted automatically. x After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan setting. But, if you press the button in the Dry or the Fan mode that is changed with the Auto mode automatically. IMPORTANT 2 Press the Result: 3 If you wish to stop the Turbo function before the end of 30-minute period, press the button twice. Result: x The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to page 16. E-11 Cooling Distant Place The Long function is used to cool your room as far as possible. You can change modes at any time. button on the button. 3 To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: x Each time you press the buttons: - The temperature is adjusted by 1OC. [. . . ] A water leakage or some other malfunction may happen if the heat exchanger freezes. Water may condense on and drip from the surface of the indoor unit if it is used for a long periods. Indoor Temperature 18°C to 32°C approx. Indoor Humidity 80% or less - Low temperature High humidity levels Mode Cooling Drying Outdoor Temperature 21°C to 43°C approx. [. . . ]