User manual SAMSUNG AQ07CMX

[. . . ] Vivaldi-IB_DB98-30079A_E 12/19/2008 10:43 AM Page 1 (1, 1) AQ07R Series AQ09 R Series AQ07C Series AQ09C Series AQ12U Series AQ18U Series Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/global/register E R DB98- 30079 A features of your new air conditioner Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. This summer, beat the heat with your own air conditioner. Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer, but can also be an efficient heating method in the winter with the advanced "Heat pump" system. [. . . ] Press the Turbo button on the remote control until Turbo indicator appears on the remote control display. The air conditioner operates in Auto fan speed and automatically adjusts the temperature according to the current room temperature. The unit operates for 30 minutes and then operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. Turbo function is only available in Auto/Cool/Heat mode. If Turbo function is selected in Dry/Fan mode, operating mode changes to Auto. To deactivate Turbo function 1. Press the Turbo button on the remote control again. Dry/Fan mode is most The air conditioner operates in last used mode, or in Auto mode if recent mode used. When you are using the remote control, make sure corresponding indicator appears on the remote control display. Temperature/Fan speed cannot be adjusted while using this function. (See page 19 for instructions. ) When the Turbo function is activated, pressing Mode button will automatically cancel the function. 20_ using advanced functions SETTING TIMER This advanced Timer function allows y away. Simply set the time and y your air conditioner automatically even when you are y. On timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is on/off . ENGLISH 1. Press the On Timer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the On Timer button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to rst 3 hours and in hourly unit after rst 3 hours. Press the Set/Cancel button on the remote control to active it on. The remote control display will show the hour(s) you have set for 3 seconds and set desired temperature will display. The air conditioner will operate automatically at set time and then On timer indicator stops blinking and stays on. If On timer is not set within 10 seconds, the air conditioner will end setting. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan/ Heat mode. (See step 3 on page 14 for instructions. ) After the set up while the unit is o , approximately after 10 seconds, all the other indicators will be gone except the On timer indicator. [. . . ] Check if the air filter is blocked by dirt. Check if the air conditioner has just been turned on. The air conditioner automatically adjusts the fan speed to Auto in A uto/Dry mode. Check if you press the Set/Cancel have set the time. [. . . ]