User manual SAMSUNG AQ09RAX

[. . . ] features of your new air conditioner · Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. This summer, beat the heat with your own air conditioner. · Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer, but can also be an efficient heating method in the winter with the advanced "Heat pump" system. "Heat pump" system is 3 times more efficient compare to the other electrical heating appliance, so you can further reduce its running cost. [. . . ] button on the remote control again, to keep the air flow direction in a Horizontal air flow Make sure one of the blade pins that stick out of the air flow blades are not broken. Move the blade pin lever left or right to keep the air flow direction in a constant position you prefer. Blade pin lever CAUTION Be extremely careful with your fingers while adjusting the Horizontal air flow direction. There is a potential risk of personal injury when the unit is mishandled. operating _19 AQ09R series_IB_E_29878A_3. 23. 09. indd 19 2009-3-23 15:07:37 using advanced functions USING THE TURBO FUNCTION Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum fan speed for 30 minutes. Press the Power button on the remote control. 2. Press the Turbo button on the remote control until Turbo indicator appears on the remote control display. The air conditioner operates in Auto fan speed and automatically adjusts the temperature according to the current room temperature. The unit operates for 30 minutes and then operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. Turbo function is only available in Auto/Cool/Heat mode. If Turbo function is selected in Dry/Fan mode, operating mode changes to Auto. To deactivate Turbo function 1. Press the Turbo button on the remote control while Turbo function is on. The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. · While you are using the remote control, make sure corresponding indicator appears on the remote control display. · Temperature/Fan speed cannot be adjusted while using this function. · Air flow can be adjusted manually. (See page 19 for instructions. ) · If you press the Mode button while the Turbo function is on, it will cancel the function. 20_ using advanced functions AQ09R series_IB_E_29878A_3. 23. 09. indd 20 2009-3-23 15:07:39 SETTING TIMER This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically. On timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is off. Press the On Timer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the On Timer button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to first 3 hours and in hourly unit after first 3 hours. [. . . ] · Check if the air filter is blocked by dirt. · Check if the air conditioner has just been turned on. · Check if you selected Auto or Dry mode. The air conditioner automatically adjusts the fan speed to Auto in Auto/Dry mode. [. . . ]