User manual SAMSUNG AQ30WCN

[. . . ] Register your product at www. samsung. com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. WARNING · If you don't follow the safety precautions, you may get the risk of an electric shock, injury or death. · The manufacturer or qualified service personnel must install this air conditioner. · Unplug the electric power before repairing, installing or cleaning. o not repair the air conditioner at your discretion. [. . . ] Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. E button: Result: ach time you press the - The temperature is adjusted by 1°C - The indoor unit beeps he air conditioner starts dehumidifying and the fan speed is T adjusted automatically. 4 To control the airflow direction, refer to pages 16 and 17. E-12 AQ30_36W_IB_E_28061A. indd 12 2007-6-20 13:05:34 Selecting the Fan Mode ENGLISH You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the (On/Off) button. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the button. The air conditioner runs in the Energy saving mode. The outer airflow blade moves up and down. To stop the Energy saving mode, press the again. Note You can select the Energy saving mode only in the Cool and Heat mode. 3 Press the button to adjust the temperature until the required temperature is displayed. 4 Press the displayed. button to select the fan speed until the required setting is 5 To control the airflow direction, refer to pages 16 and 17. E-15 AQ30_36W_IB_E_28061A. indd 15 2007-6-20 13:05:39 Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the button until the required direction is set. Result: The outer blade is adjusted vertically. 2 Press the button to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. If you turn the air conditioner. . . set to the default position. E-16 AQ30_36W_IB_E_28061A. indd 16 2007-6-20 13:05:40 Adjusting the Airflow Direction Horizontally ENGLISH You can adjust the airflow direction horizontally with your hands. The inner blades with small fins moves the air to the required direction. 1 Adjust the inner blades by moving them to left or right. E-17 AQ30_36W_IB_E_28061A. indd 17 2007-6-20 13:05:41 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of theremote control to select the mode in advance. [. . . ] Check if the air conditioner is turned on. If necessary, press the (On/Off) button on the remote control. Check if the Timer indicator on the indoor unit is on. If so: - Wait until the set time is reached and the air conditioner starts automatically. [. . . ]