User manual SAMSUNG AQ30WCX

[. . . ] USER'S MANUAL AQ30W Series AQ32W Series AQ36W Series Split - type Air Conditioner (Cooling and Heating) E R DB98-30224A(2) AQ30_36W_IB_E_28065A. indd 29 2007-6-27 13:29:49 Register your product at www. samsung. com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. WARNING · If you don't follow the safety precautions, you may get the risk of an electric shock, injury or death. · The manufacturer or qualified service personnel must install this air conditioner. · Unplug the electric power before repairing, installing or cleaning. o not repair the air conditioner at your discretion. [. . . ] To control the airflow direction, refer to pages 16 and 17. 4 E-14 AQ30_36W_IB_E_28065A. indd 14 2007-6-27 13:29:36 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling or heating. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the button. The air conditioner runs in the Energy saving mode. The outer airflow blade moves up and down. To stop the Energy saving mode, press the again. Note You can select the Energy saving mode only in the Cool and Heat mode. 3 Press the button to adjust the temperature until the required temperature is displayed. 4 Press the displayed. button to select the fan speed until the required setting is 5 To control the airflow direction, refer to pages 16 and 17. E-15 AQ30_36W_IB_E_28065A. indd 15 2007-6-27 13:29:38 Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the button until the required direction is set. Result: The outer blade is adjusted vertically. 2 Press the button to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. If you turn the air conditioner. . . set to the default position. E-16 AQ30_36W_IB_E_28065A. indd 16 2007-6-27 13:29:39 Adjusting the Airflow Direction Horizontally You can adjust the airflow direction horizontally with your hands. The inner blades with small fins moves the air to the required direction. 1 Adjust the inner blades by moving them to left or right. E-17 AQ30_36W_IB_E_28065A. indd 17 2007-6-27 13:29:39 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of theremote control to select the mode in advance. T Result: he air conditioner operates in the selected mode when it is turned on. Note If you don't use the remote control after setting the On Timer, it turns off automatically after 25 hours. To Cancel the On Timer 1 Press the Note button to cancel the On Timer. button, both the On Timer and the Off Timer E-18 AQ30_36W_IB_E_28065A. indd 18 2007-6-27 13:29:41 Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the Off Timer. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. [. . . ] Check that there is no obstacle in front of the outdoor unit. Check if the required temperature is set correctly. If the airflow is directed upwards, set the blade downwards with the remote control. Check if the mode is set to the Auto, Cool, Heat or Fan mode; in the Dry mode, the fan speed changes automatically. The air conditioner does not operate with the remote control. No beep is heard when you press the (On/Off) button on the remote control. [. . . ]