User manual SAMSUNG AQV12AWBN

[. . . ] features of your new air conditioner · Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. Beat the heat with your own air conditioner this summer. · Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer, but also can be an efficient heating method in the winter with the advanced "Heat pump" system. "Heat pump" system is 3 times more efficient compare to the other electrical heating appliance, so you can further reduce its running cost. [. . . ] On timer is available while your air conditioner is off. Press the OnTimer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the Time or button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to first 3 hours and in hourly unit after first 3 hours. 3. Press the Set/Cancel button on the remote control to active it on. The remote control display will show the hour(s) you have set for 3 seconds and set desired temperature will display. The air conditioner will operate automatically at set time and then On timer indicator stops blinking and stays on. If On timer is not set within 10 seconds, the air conditioner will end setting. 4. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan/ Heat mode. · Temperature can also be adjusted (see step 3 on page 14 for instructions). · All the indicators other than On Timer indicator will disappear approximately after 10 seconds after the setup. · When the On Timer setting is done, you can press the OnTimer button again to change the preset time. Press the Time or button to change time setting and then press the Set/Cancel button to active it on. To deactivate the On Timer 1. Press the Set/Cancel button on the remote control while On Timer is on. On timer you set will be canceled and On timer indicator will disappear. using advanced functions _21 using advanced functions SETTING TIMER Off Timer This function allows you to turn off the air conditioner automatically within the time range of 24 hours. Off timer is available while your air conditioner is on. Press the OffTimer button on the remote control. Off timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn off automatically. [. . . ] The air conditioner automatically adjusts the fan speed to Auto in Auto/Dry mode. · Check if you press the Set/Cancel button on the remote control after you have set the time. · Check if the appliance is running in a smoky area or if there is a smell entering from outside. Operate the air conditioner in Fan mode or open the windows to air out the room. The temperature does not change. [. . . ]