User manual SAMSUNG AQV12VBE

[. . . ] Contents PREPARATION Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control ­ Buttons and Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The mode can be selected only when the air conditioner is switched on or off in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select cool or heat mode. The indoor unit beeps each time you press the The air conditioner runs in cool or heat mode. button. 3 Press the Result: button. The Off timer is blinking on the remote control. 4 To set the Off timer, press the until the required Off time is displayed. Result: buttons once or more times mode will be automatically stopped in The 8 hours if the operation time is not set. You can set the Off timer by pressing the buttons to mode automatically at the turn off the appointed time within a range of 30 minutes to 12 hours. Each time the buttons are pressed, the time is mode will be increased by 30 minutes or 1 hour. stopped at the appointed off time. 5 Press the Result: Note button. In the case of selecting mode or adjusting the extra mode, you should press the time for button button within within 10 seconds. If you do not press the mode will be canceled automatically. 10 seconds, 6 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 61°F(16°C) and 86°F(30°C). Result: Each you press the time button; - The temperature adjusts by 1°F - The indoor unit beeps E-18 Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the mode, and then the air conditioner three stages; Falling asleep, Sound sleep, and Waking up from will automatically turn off when the set time has elapsed prevents you from having difficulty sleeping on extremely hot/cold nights Three stage Falling Asleep :Eases you into sleep by dropping the temperature. Sound Sleep :Relaxes your body and raises your temperature slightly. Wake Up :Allows you to wake up to comfortable crisp air making you feel refreshed and energized mode for more than 5 hours. Sleep · Set the Off timer in mode is set for too short or too may be disturbed if the long a time because the temperature changes are set to an 8-hour cycle. mode is set for less than 4 hours, the operation will stop at the set time. · If the If the mode is set for over 5 hours, the last hour will run in Waking Up stage before shutting off. · Recommended set temperature is between 77°F~81°F(25°C~27°C )for cooling and 70°F~73°F(21° C~23°C) for heating. Temp. Set temperature When the 8-hour cycle completes, this section repeats. [. . . ] Check if the air conditioner is cooling only model. Check if the remote control is for cooling only model. Check if set temperature higher(lower) than current temperature. Select the Cool, Heat, Auto or Dry mode. [. . . ]