User manual SAMSUNG AS07A2VB

[. . . ] OWNER'S INSTRUCTIONS Indoor Unit AS070VE/D/B AS090VE/D AS120VE/D AS071VE/D/B AS091VE/D AS121VE/D Indoor Unit AS07A1(A2)VE/B AS09A1(A2)VE/B AS12A1(A2)VE/B SC09ZV SC12ZV AS07A1(A2)VA AS09A1(A2)VA AS09D1(D2)VD AS12D1(D2)VD SPLIT-TYPE ROOM AIR CONDITIONER (Cool) E NL DB68-00817A(1) Safety Precautions The following safety precautions must be taken when using your air conditioner. 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. [. . . ] x The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped It will start up normally after a three-minute. IM IMPORTANT 2 If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press x The air conditioner starts up in Cool mode. N o t e You can change modes at any time. MODE . MODE TURBO OFF 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x Each time you press or : - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. MODE TURBO OFF 4 Select the fan speed by pressing the until the required setting is displayed: Low Medium High Automatic Result: Each time you press button one or more times , the indoor unit beeps. 5 To control the direction of the air flow, refer to page 14. E-10 Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Example: You have just come home and find that the room is very hot. N o t e You can change modes at any time. MODE . MODE TURBO OFF 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x Each time you press or : - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. MODE TURBO OFF 4 To control the direction of the air flow, refer to page 14. E-12 Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: (On/Off) button. x The OPERATION indicator on the indoor unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The indoor unit beeps. MODE TURBO OFF 2 If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press MODE . x The FAN indicator on the indoor unit lights up. x The air conditioner starts up in Fan mode. You can change modes at any time. Note MODE TURBO OFF 3 Select the fan speed by pressing the the required setting is displayed: Low Medium High Result: Each time you press button one or more times until , the indoor unit beeps. 4 To control the direction of the air flow, refer to page 14. E-13 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the button under the remote control flap one or more times as required. Result: The outer blade is adjusted vertically. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. To stop the blade moving up and down, press the button again. 3 Note If you switch the air conditioner. . . [. . . ] Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. x Check that the OPERATION indicator on the indoor unit is on; if necessary press (On/Off) on the remote control. x Check whether the TIMER indicator on the indoor unit is switched on. If so: - Wait until the switch-on time is reached and the air conditioner starts up automatically - Cancel the timer (see page 17 for further details) x Check that there are no obstacles between you and the indoor unit. [. . . ]