User manual SAMSUNG AS09SAN

[. . . ] Contents PREPARATION Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control ­ Buttons and Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] button. In the case of adjusting the extra time for mode, you button within 10 seconds. If you do not press should press the mode will the button within 10 seconds. automatically stop in 8-hour operation. 4 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 16°C and 30°C. E ach time you press the button; Result: - The temperature adjusts by 1°C - The indoor unit beeps E-18 Selecting the Energy Saving Function ENGLISH Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the three stages; Falling asleep, Sound sleep, and Waking up from mode, and then the air conditioner will automatically turn off when the set time has elapsed. Three stage prevents you from having difficulty sleeping on extremely hot/cold nights. Falling asleep : Eases you into sleep by dropping the temperature. Sound sleep : Relaxes your body and raises your temperature slightly. aking up from W mode : Allows you to wake up to comfortable crisp air making you feel refreshed and energized. · Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the mode is set for too short or too long a time because the temperature changes are set to an 8-hour cycle. mode is set for less than 4 hours, the operation will stop at the set time. mode is set for over 5 hours, the last hour will run in Waking Up stage before · Recommended set temperature is between 25°C~27°C for cooling and 21°C~23°C for heating. Cool mode Temp. Set temperature When the 8-hour cycle completes, this section repeats. When the 8-hour cycle completes, this section repeats. Set temperature Time(hr. ) E-19 Selecting the Turbo Function You can select the Turbo Function if you want to cool or heat your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button. The temperature and fan settings are adjusted automatically. The air conditioner cools or heats the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous setting. You can select the Turbo function in Auto, Cool and Heat mode. [. . . ] Select the Cool, Heat, Auto or Dry mode. Check if the air filter is blocked by dirt. Check if the there is cover on the outdoor unit or any obstacle. Check if you installed the air conditioner under direct sunlight. [. . . ]