User manual SAMSUNG AS09XLX

[. . . ] Operating Your Air Conditioner Without the Remote Control . . . . . . . . . . . . . . . . . . Selecting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECOMMENDATIONS FOR USE Cleaning Air Filter on Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Deodorizing and Bio filter(Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 15. E-10 Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Note You can change modes at any time. 3 Press the displayed. button to select the fan speed until the required setting is Low Medium High button, the indoor unit beeps. Result: Each time you press the 4 To control the airflow direction, refer to page 15. E-11 You can select the Turbo Function if you want to cool your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 15. 2 Selecting Mode modehelps users to fall asleepwell after going to bed whether being too hot to sleep or being awakenedbycoldness. If the mode is set over 5 hours, it will run as Wake Up stage for the last one hour before stop. To Cancle the good'sleep If you no longer wish to use good'sleep that you have set, you can cancle it at any time. Press the button to switch off the air conditioner To cancle a selected good'sleep mode, you can also press the button, the button, or button, the air conditioner button, the will run in cool mode. Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs. By adjusting the airflow direction, the efficiency of the air conditioner can be increased. Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. 3 Press the button again to stop the blade moving up and down. If you turn the air conditioner. . . T hen the blade. . . On set to the default position. Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually. The inner blades with small fins move the air in the desired direction. 1 Adjust the inner blades by moving them left or right. Make sure do not touch the inner blades during operation. It may cause injury on your fingers. E-15 E-16 17 18 Cleaning Air Filter on Your Air Conditioner Front grille Hook Body E-19 Cleaning Deodorizing and Bio filter(Option) E-20 Temperature and Humidity Ranges If you check the following tables, you can use your air conditioner more efficiently. Heating capacity Low temperatures Protection mechanism Operation Cooling Dehumidifying Then. . . [. . . ] In Auto or Dry mode, the fan speed is selected automatically. Check if the remote control sensor is blocked. Check if the air conditioner is placed near strong light. Check if you pressed the button after selecting time. The temperature is not adjusted. [. . . ]