User manual SAMSUNG AS12PGGB

[. . . ] OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION ISTRUZIONI PER L'USO MANUAL DE INSTRUES GEBRAUCHSANWEISUNG TM TM Indoor unit AS07P8GB AS07P8GE AS09P8GB AS09P8GE AS12PGGB AS12PGGE AS14PGGB AS18P0GB AS18P0GE AS24P6GB AST24P6GE Outdoor unit US07P8GB US07P8GE US09P8GB US09P8GE US12PGGB US12PGGE US14PGGB US18P0GB US18P0GE US24P6GB UST24P6GE FRANAIS EHNIKA DEUTSCH PORTUGUS ITALIANO Split-type Room Air Conditioner (Cool) Aire acondicionado domstico sistema Split (Refrigeracin) Climatiseur de type Spar (Refroidissement) Condizionatore d'aria per ambienti ad unit Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigerao) Geteilte raumklimaanlage (Khlen) IAIPOYMENO KIMATITMTIKO MATIOY(~) E S F I P D G DB98-14367A(1) ESPAOL ENGLISH Safety Precautions WARNING DANGER N If the power supply cord of this air conditioner is damaged, it must be replaced by the manufacturer or its authorized service personnel only in order to avoid a safety hazard. N Do not attempt to install the air conditioner by yourself. N This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs. [. . . ] N The indoor unit beeps. 2 Press the Result: button. N The temperature and fan settings are adjusted automatically. N The air conditioner cools the room as quickly as possible. N After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the Result: button again. The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to pages 16 and 17. E-11 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: (On/Off) button. N The operation indicator on the indoor unit lights up. 1 If necessary, press the Result: (On/Off) button. N The operation indicator on the indoor unit lights up. N The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: N Plugged in N Stopped lt will start up normally after three minutes. IMPORTANT 2 Select COOL mode by pressing the Note button. You can select the Energy saving mode only in COOL mode. 3 Press the Result: N N N N button. The air conditioner runs in the Energy saving mode. The outer air flow blade moves up and down. To stop the Energy saving mode, press the button again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26C and 30C inclusive. Note If you want to adjust temperature under 26C, cancel the Energy saving mode before adjusting the temperature. 5 To select the fan speed, press the the required setting is displayed. button one or more times until 6 To control the direction of the air flow, refer to pages 16 and 17. E-14 Air Cleaning (Titanium Filter Operating) ENGLISH Titanium Filter removes microscopic dirt and unpleasant odors. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. N The air conditioner run in the air cleaning mode. Note N If you press the button when the air conditioner is on, the function is operated additionally. N If you press the button during off, the air conditioner will turn on automatically and operate air cleaning in the Fan mode with Low fan speed. 2 If you wish to stop the Air cleaning function, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to pages 16 and 17. E-15 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button one or more times as required. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the Result: button. [. . . ] If so: - Wait until the switch-on time is reached and the air conditioner starts up automatically - Cancel the timer (see pages 18 and 19 for further details) N Check that there are no obstacles between you and the indoor unit. N Check that you are close enough to the indoor unit (seven meters/ yards or less). N Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit. N Replace the remote control batteries if necessary. [. . . ]