User manual SAMSUNG AS18UUAX

[. . . ] features of your new air conditioner · Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. Beat the heat with your own air conditioner this summer. · Look for Everywhere The elegant and harmonious design gives priority to the esthetics of your space and complements any of your existing interior décor. With its soft color and rounded-edge shape, the new air conditioner adds class to any room. [. . . ] Turbo function is only available in Auto/Cool mode. If Turbo function is selected in Dry/Fan mode, operating mode changes to Auto. To deactivate Turbo function 1. Press the Turbo button on the remote control while Turbo function is on. The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. · While you are using the remote control, make sure corresponding indicator appears on the remote control display. · Temperature/Fan speed cannot be adjusted while using this function. · Air flow can be adjusted manually (see page 18 for instructions). · If you press the Mode button while the Turbo function is on, it will cancel the function. using advanced functions _19 MID_AS09U series_IB_30920A_E_9. 09. 09. indd 19 2009-9-23 9:54:00 using advanced functions SETTING TIMER This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically. On Timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is off. Press the On Timer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the On Timer button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to first 3 hours and in hourly unit after first 3 hours. Press the Set/Cancel button on the remote control to active it on. The remote control display will show the hour(s) you have set for 3 seconds and set desired temperature will display. The air conditioner will operate automatically at set time and then On timer indicator stops blinking and stays on. If On timer is not set within 10 seconds, the air conditioner will end setting. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan mode. · Temperature can also be adjusted (see step 3 on page 14 for instructions). [. . . ] Press the Temp or button on the remote control to change the set temperature. Press the Temp or button to increase or decrease the temperature. · Check if the air filter is blocked by dirt. · Check if the air conditioner has just been turned on. [. . . ]