User manual SAMSUNG AS24VBAX

[. . . ] Contents PREPARATION Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control ­ Buttons and Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The operation indicator on the indoor unit lights up. The air conditioner starts up in Cool mode with Turbo fan speed. The indoor unit beeps. 2 Press the Result: button to select cool mode. The indoor unit beeps each time you press the The air conditioner runs in cool mode. button. 3 Press the Result: button. The Off timer is blinking on the remote control. 4 To set the Off timer, press the until the required Off time is displayed. Result: buttons once or more times The mode will be automatically stopped in 8 hours if the operation time is not set. You can set the Off timer by pressing the buttons to mode automatically at the turn off the appointed time within a range of 30 minutes to 12 hours. Each time the buttons are pressed, the time is increased by 30 minutes or 1 hour. mode will be stopped at the appointed off time. 5 Press the Result: Note button. In the case of selecting mode or adjusting the extra mode, you should press the time for button within 10 seconds. If you do not press the button within 10 seconds, mode will be canceled automatically. 6 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 16°C and 30°C. Result: Each time you press the button; - The temperature adjusts by 1°C - The indoor unit beeps E-18 In cool mode mode keeps the skin temperature at the best during the 3 stages such as, Falling Asleep Stage Sound Sleep Stage Wake Up Stage in order. alling Asleep Stage : F ound Sleep Stage : S ake Up Stage : W Temp. This stage supports the environment to quickly cool down. Together with comfortable intermittent air, you will be able to fall asleep quickly. This stage helps users to take deep sleep and keep the healthy skin by controlling wavy temperature control and insensible air stream. This stage supports comfortable intermittent air to the room to raise human body temperature for refreshing wake up. Set temperature When the set time is over 8 hours, this section will be repeated. Time(hr. ) The recommended temperature is set between 25°C and 27°C, and 26°C is the most ideal temperature for comfortable sleep. Airflow blades and fan speed are controlled automatically as the above 3 stages in mode. You feel disturbed sleep if the is set too short or long because the basic off timer is set for 8 hours. If the mode is set less than 4 hours, the operation will be stopped after the set time. If the mode is set over 5 hours, it will run as Wake Up stage for the last one hour before stop. E-19 ENGLISH Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs. By adjusting the airflow direction, the efficiency of the air conditioner can be increased. Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. [. . . ] Explanation/Solution Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if the air conditioner is cooling only model. Check if the remote control is for cooling only model. [. . . ]