User manual SAMSUNG AS24W6WE-XSH

[. . . ] USER'S MANUAL Indoor Unit AS18WJWB AS18WJWD AS18WJWE AS24W6WB AS24W6WE Outdoor Unit US18WJWB US18WJWD US18WJWE US24W6WB US24W6WE Split-type Air Conditioner (Cooling) E DB98-20222A(1) Register your product at www. samsung. com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. · If you don't follow the safety precautions, you may get the risk of an electric shock, injury or death. ·The manufacturer or qualified service personnel must install this air conditioner. · Unplug the electric power before repairing, installing or cleaning. WARNING DURING OPERATION x Do not repair the air conditioner at your discretion. It is recommended to contact a service center directly. [. . . ] 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: button on the remote control until is displayed. button. x The indoor unit beeps each time you press the x The air conditioner runs in the Fan mode. x The temperature is set automatically. Note You can change modes at any time. 3 Press the is displayed. button to select the fan speed until the required setting Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 To control the airflow direction, refer to page 15. E-12 Selecting the Turbo Function You can select the Turbo Function if you want to cool your room in the fastest way. After the 30 - minute operation with the maximum setting, it returns to the previous setting. 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: button. x The temperature and fan settings are adjusted automatically. x The air conditioner cools the room as quickly as possible. x After 30 minutes, the air conditioner is reset automatically to the previous setting. x You can select the Turbo function in the Auto and Cool mode. If you select this function in the Dry or Fan mode, the mode changes to the Auto mode. 3 Press the button again to stop the Turbo Function before the end of the 30-minute period. Result: The air conditioner is reset automatically to the previous setting. 4 To control the airflow direction, refer to page 15. E-13 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: x x x x button. The air conditioner runs in the Energy saving mode. The outer airflow blade moves up and down. button, both the On Timer and the Off Timer E-16 Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. [. . . ] x Make sure that you are within 7 meters from the indoor unit. x Check if you are pointing the remote control at the remote control sensor on the right side of the indoor unit. x Replace the remote control batteries if necessary. x Check if the correct operating mode has been selected (Auto, Cool). [. . . ]