User manual SAMSUNG AS32C2BCD/XAP

[. . . ] Indoor unit SC30ZA2 SC30ZA2D SC30ZC1(C2)(C3)(C4) SC30ZC1(C2)(C3)(C4)D AST30C1(C2)(C3)(C4)BE AST30C1(C2)(C3)(C4)BED AST32C1(C2)BE AST32C1(C2)BED AS30C1(C2)(C3)(C4)BC AS30C1(C2)(C3)(C4)BCD AS32C1(C2)(C3)(C4)BC AS32C1(C2)(C3)(C4)BCD Outdoor unit SC30ZA2X SC30ZA2DX SC30ZC1(C2)(C3)(C4)X SC30ZC1(C2)(C3)(C4)DX UST30C1(C2)(C3)(C4)BE UST30C1(C2)(C3)(C4)BED UST32C1(C2)BE UST32C1(C2)BED US30C1(C2)(C3)(C4)BC US30C1(C2)(C3)(C4)BCD US32C1(C2)(C3)(C4)BC US32C1(C2)(C3)(C4)BC ITALIANO RUSSIAN EHNIKA DEUTSCH FRANAIS PORTUGUS Split-type Room Air Conditioner (Cool) Aire acondicionado domstico sistema Split (Refrigeracin) Condizionatore d'aria per ambienti ad unit Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigerao) Climatiseur de type Spar (Refroidissement) Geteilte raumklimaanlage (Khlen) IAIPOYMENO KIMATITMTIKO MATIOY (~) (i) E S I P F D G R DB98-04803A(6) ESPAOL OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER L'USO MANUAL DE INSTRUES MANUEL D'UTILISATION GEBRAUCHSANWEISUNG TM TM ENGLISH Register your product at www. samsung. com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. Disconnect all remote electric power supplies before servicing, installing or cleaning. This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. x Users of this product are cautioned not to attempt repair of this product at their own discretion. [. . . ] You can change modes at any time. Note 3 To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature. ), press the TEMPERATURE buttons one or more times. -2C -1C < When you feel hot > < When you feel chilly > E-10 Cooling Your Room ENGLISH You must select the Cool mode if you wish to adjust the: x Cooling temperature x Fan speed when cooling 1 If necessary, press the Result: (On/Off) button. x The 5 Way indicator on the indoor unit lights up. x The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press the MODE button. x The air conditioner runs in COOL mode. You can change modes at any time. Note 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18C and 30C inclusive. Result: x Each time you press the TEMPERATURE buttons: - The temperature is adjusted by 1C - The indoor unit beeps x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. 4 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Automatic (rotated : Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. N o t e You can change modes at any time. Result: 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18C and 30C inclusive. Result: x Each time you press the TEMPERATURE buttons: - The temperature is adjusted by 1C - The indoor unit beeps x The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 15. E-13 Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: (On/Off) button. x The 5 Way indicator on the indoor unit lights up. x The air conditioner starts up in the mode selected when the unit was last used. x The indoor unit beeps. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press the MODE button. You can change modes at any time. Note 3 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 15. E-14 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. Set to the initial position powered. Note Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. [. . . ] 18C to 43C approx. If the cooling operation is used at over 33C(indoor temperature) then, it does not cool as its full capacity. Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IMPORTANT 1 Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. Disassemble the front grille by pulling it forwards. Lift out the bottom edge of the air filters and pull down to release them. [. . . ]